Home Network Community > Deco > Deco X50(V1) 1.1.0
< Deco

Official Release Deco X50(V1) 1.1.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1567

Official Release Deco X50(V1) 1.1.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
61 Reply
Re:Deco X50(V1) 1.1.0
2023-02-01 14:44:10

  @Stuart0001 

 

I've been asking the same question.  It would be nice to get an answer.

  0  
  0  
#55
Options
Re:Deco X50(V1) 1.1.0
2023-02-08 10:14:49

  @David-TP 

 

 

hello.

 

I updated the firmware of my deco x50 and I have serious signal problems with several devices in constant signal loss.

 

Anyone with the same problem or any solution?

thanks

  0  
  0  
#56
Options
Re:Deco X50(V1) 1.1.0
2023-02-09 01:40:59

  @nmdasilva 

Hi, welcome to the community.

It would help a lot if you could provide more details about your current issue with Deco X55 1.1.0.

What are the devices that dropped the wireless signal a lot?

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#57
Options
Re:Deco X50(V1) 1.1.0
2023-02-09 14:40:51

  @David-TP 

 

Hello

On any type of equipment.
It seems that the first ones to connect do it normally, but any of the following ones don't seem to get the IP assigned to them.

Everything worked fine until I updated the firmware.
  0  
  0  
#58
Options
Re:Deco X50(V1) 1.1.0
2023-02-18 09:17:55

  @David-TP 

 

i was very excited when I saw firmware update 1.0.1 Build 20221103 Rel. 43203 was available for my v1.2 x50s, but that turned to disappointment when I realised that the update doesn't include the Client Preferred Connection option.  Very disappointed!  I really need that feature to prevent my Ring doorbell from constantly disconnecting.

  0  
  0  
#59
Options
Re:Deco X50(V1) 1.1.0
2023-03-04 20:53:15

  @David-TP 

 

Has anyone successfully used this firmware to establish a VPN client in the router? I have tried, and the router indicates that it has connected with the vpn node using OoenVPN, but no traffic will flow.

 

hoping someone can help!

 

thanks,

 

Mark

  0  
  0  
#60
Options
Re:Deco X50(V1) 1.1.0
2023-03-15 19:28:36

In case you haven't seen it, since a few days ago, there is the new version V1_1.2.0 Build 20230113 available for download from Worldwide / English of DECO X50. In my case and from the tests carried out it seems to work well. Tanks TP Link!

  2  
  2  
#61
Options
Re:Deco X50(V1) 1.1.0
2023-04-06 08:08:15

  @BliXem 

Hi, welcome to the community.

It is planned to release the same feature on Deco X50-PoE as well.

But the release date could not be guaranteed.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#63
Options
Re:Deco X50(V1) 1.1.0
2023-04-27 10:16:46

  @mirdragon 

 

I get the exact same issue on my X50's. Only when they are plugged into the network though. If they operate over Wi-Fi - no problem

 

Logs:

Thu Apr 27 12:14:16 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1424: Error: can't find ifname[eth1.591] in eth_ifname

Thu Apr 27 12:14:19 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1424: Error: can't find ifname[eth1.591] in eth_ifname

Thu Apr 27 12:14:23 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1424: Error: can't find ifname[eth1.591] in eth_ifname

Thu Apr 27 12:14:27 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1424: Error: can't find ifname[eth1.591] in eth_ifname

Thu Apr 27 12:14:28 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1424: Error: can't find ifname[eth1.591] in eth_ifname

Thu Apr 27 12:14:31 2023 daemon.err /usr/bin/apsd: apsd_check_eth_has_neigh:1424: Error: can't find ifname[eth1.591] in eth_ifname

 

Anyone have a solution?

  0  
  0  
#65
Options
Re:Deco X50(V1) 1.1.0
2023-04-27 10:46:38

  @Air_sic i think its an issue with the firmware and how it communicates, i've now returned my x50's as too expensive for an access point

  1  
  1  
#66
Options
1567

Tags

Firmware Update Official Highlighted Thread
1.1.0
Related Articles
Cannot update Deco x50 v1 firmware from version 1.2.2
154 1
 Deco X55 1.1.0
6522 0
 ECO Mode on Deco X50/Deco X55
3235 3
 Deco M4(V4) 1.1.0
21219 2
 Deco X50 - Red Light *FIXED* V1
1215 1
 DECO X50 V1.2 vs v1
3030 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.