Home Network Community > Deco > Deco X50(V1) 1.1.0
< Deco

Official Release Deco X50(V1) 1.1.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123...

Official Release Deco X50(V1) 1.1.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
61 Reply
Re:Deco X50(V1) 1.1.0
2022-12-13 16:27:09

Before downloading the Deco log, I decided to reboot the camera and Decos for a "clean" test. I did several tests and I could not re-produce the camera problem. I tried to force it to change the Deco and it worked without problem. Either it's a camera bug or a firmware bug. If it happens later I'll tell you about it.
I still leave the brand and model: SriHome Model SH038.

 

I could check the log of the main Deco and I see several errors like "daemon.err nrd[18636]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3" all the time. I restarted several times the Decos and the modem/router of the provider and this problem persists (attached 3 logs in different time).
I put another router that I have at home, replacing the Deco X50 model TP-Link Archer AX50 and this error does not appear.
My provider gave me a Huawei Echolife HG8247H5 modem router. This equipment is configured in bridge mode.
What is your opinion about this? 

 

Answering another question that @David-TP asked me: if there is no alert on the smartphone screen, will you see any notifications in the Message box on the APP?.
The answer is yes. That is, when I use the X50 Decos I don't get a popup while the app is running in background, but if I open it, I see the message that a new device connected to my network.
This does not happen if I use the Deco M5. The message with the app in background comes ok. It's weird because the cell phone and the app is the same.

 

Thanks!

File:
Logs Deco X50.zipDownload
  1  
  1  
#13
Options
Re:Deco X50(V1) 1.1.0
2022-12-14 08:57:41

  @JavierC 

Thanks for the update.

As for the error log, I do see another user mentioned the same logs and he also has Deco X50:

https://community.tp-link.com/en/home/forum/topic/592212

Tue Dec 13 14:16:46 2022 daemon.err nrd[26921]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3

Tue Dec 13 14:16:46 2022 daemon.err nrd[26921]: wlanifMapToPhyMode: Invalid PHY mode from driver: 20

Tue Dec 13 14:16:46 2022 daemon.err nrd[26921]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 20

I am not quite sure what it means and will check with the engineer later.

 

For the popup alerts on the mobile screen, I did not have Deco X50 available for the test yet and would like to follow up on your case by email to seek for more advice from the engineers. Please check whether you are able to get an email from me later.

 Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#14
Options
Re:Deco X50(V1) 1.1.0
2022-12-14 22:11:09

  @David-TP Hi David,

 

I have the exact same issue that @xplodzs faced.

 

After updating my 3 units of Deco X50 to the latest version (1.1.0) the ethernet connection keeps disconnecting from the main deco to the satellites.

 

The 3 of them are connected in router mode via ethernet. My wifi is set as 2.4/5Ghz and it worked flawlessly before the update of the APP to the v3.0 and the firmware of the decos.

 

I have reviewed the logs and the error wlanifMapToBandwidth: Invalid bandwidth from driver: 3 is getting repeated over and over again.

 

Indeed I am just 2 meters away from one wired Deco.

 

Do you have any idea of what could be causing this? Should I factory reset all the Decos?

 

BR
Lucas

  2  
  2  
#15
Options
Re:Deco X50(V1) 1.1.0
2022-12-15 03:31:07

When is the update coming to x60 which is by the way a more superior model than x50? Cant believe we're treated this way.

  2  
  2  
#16
Options
Re:Deco X50(V1) 1.1.0
2022-12-15 06:31:02

  @David-TP

 

Is this a manual update as just got the X50 triple pack and it says when checking that the firmware is upto date, but its on 1.0.8 Build 20220407 Rel. 69134

 

 

  0  
  0  
#17
Options
Re:Deco X50(V1) 1.1.0
2022-12-16 03:09:10
▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#18
Options
Re:Deco X50(V1) 1.1.0
2022-12-16 06:34:31

  @David-TP Thanks, I've manually updated and this has resolved my network speed issues across all devices, now get my full 330/50 internet speed, so hoping when switch to 1Gb internet i won't see any issues

  2  
  2  
#19
Options
Re:Deco X50(V1) 1.1.0
2022-12-16 11:45:35

  @David-TP  https://community.tp-link.com/en/home/forum/topic/584954?replyId=1148576   problem repeat and repeat ,,after reboot Deco'S - work few day

  0  
  0  
#20
Options
Re:Deco X50(V1) 1.1.0
2022-12-17 16:18:51

@David-TP. Can this firmware update will be available at the end of this year or will rollout next year?

  1  
  1  
#21
Options
Re:Deco X50(V1) 1.1.0
2022-12-18 10:33:22

  @MarleMore you can install manually, by downloading the update, unzipping it, then update via the web interface

  1  
  1  
#22
Options
123...

Tags

Firmware Update Official Highlighted Thread
1.1.0
Related Articles
 Deco X55 1.1.0
6730 0
Cannot update Deco x50 v1 firmware from version 1.2.2
230 1
Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
4243 1
 ECO Mode on Deco X50/Deco X55
3413 3
 Deco M4(V4) 1.1.0
21707 2
 Deco X50 - Red Light *FIXED* V1
1310 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.