er605 as dhcp server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

er605 as dhcp server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
er605 as dhcp server
er605 as dhcp server
2022-09-11 15:00:33 - last edited 2022-09-12 06:26:19
Tags: #dhcp
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.2.0 Build 20220114 Rel.76871

Hi,

I have an er605 as my main router and i connected vr400 as a wireless access point to it,
i configured the vr400 with inetrnet connection dynamic ip, i set the internal ip to 192.168.2.1 and enabled dhcp, however i would like to configure it to dhcp relay and get the dhcp from er605

how do i configure er605 to delegate the dhcp on 192.168.2.0/24, the er605 does already delegate dhcp over 192.168.0.1/24

  0      
  0      
#1
Options
1 Accepted Solution
Re:er605 as dhcp server-Solution
2022-09-11 21:04:04 - last edited 2022-09-12 06:26:19

  @Tnimni 

 

If you want your er605 to be your main router and DHCP server, then you need to set VR400 with LAN IP address in 192.168.0.1/24  network (i.e. 192.168.0.254):

 

 

Here's the official guide for configuring a DSL modem in AP mode.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:er605 as dhcp server-Solution
2022-09-11 21:04:04 - last edited 2022-09-12 06:26:19

  @Tnimni 

 

If you want your er605 to be your main router and DHCP server, then you need to set VR400 with LAN IP address in 192.168.0.1/24  network (i.e. 192.168.0.254):

 

 

Here's the official guide for configuring a DSL modem in AP mode.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:er605 as dhcp server
2022-09-12 06:28:15

  @terziyski thank you for this, it solved the issue

 

it also works without selecting the DHCP relay option, even if slower

1 more question if you don't mind, let's say I want to isolate the wifi network, i.e. have it on a different subnet using the er605 and vr400, how do I do it?
i believe I need to configure vlan right? i would appreciate help

  0  
  0  
#3
Options
Re:er605 as dhcp server
2022-09-12 09:41:39

  @Tnimni 

 

Yes, that's correct. If you want to isolate VR400 traffic, you have to use VLANs on er605.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options