Home Network Community > Wi-Fi Routers > No funciona las RUTAS ESTATICAS
< Wi-Fi Routers

No funciona las RUTAS ESTATICAS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No funciona las RUTAS ESTATICAS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No funciona las RUTAS ESTATICAS
No funciona las RUTAS ESTATICAS
2022-08-17 19:33:31
Model: Archer AX50  
Hardware Version: V1
Firmware Version: Archer AX50(US)_V1_220526
Good afternoon, I have a problem with my AX3000 ROUTER because it turns out that the STATIC ROUTES module does not work, which does not work as a ROUTER but would be a simple ACCESS POINT, it has also happened to me with lower models such as ARCHER C6 and ARCHER C60 and neither works as a ROUTER! Could someone help me because I have to reconfigure a structured network and I have not been able to because the current router already has faults but it is a network segment ROUTER which is a WRD 3600 N600 model which does work with STATIC ROUTES. Here's an example photo!

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:No funciona las RUTAS ESTATICAS
2022-08-22 09:37:33

@RayKumm 

 

Where is the Archer AX50 (or Archer C6, Archer C60) in the network diagram?

 

How did you test that the Static Route is not working? Please follow the description in the User Guide to review the Static Route settings on the AX50, then confirm if it works or not:

https://www.tp-link.com/us/user-guides/archer-ax50_v1/chapter-12-customize-your-network-settings#ug-sub-title-6

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:No funciona las RUTAS ESTATICAS
2022-08-22 23:05:32

  @Kevin_Z 

It is the only router that is represented in the network diagram.

 Well, I tested the static routes by passing them from the router where the WRD3600 works to the routers that don't work like (AX50, C50, C60).

It must be understood that the tests I have carried out are for SEPARATE routers, because what interests me is having ONE SINGLE ROUTER installed as I am managing it exclusively with the WDR3600.

 

Static Routing in WDR3600 and working

 

Static Routing in AX50 and not working

  0  
  0  
#3
Options
Re:No funciona las RUTAS ESTATICAS
2022-08-23 05:57:46

@RayKumm 

 

Are you saying there is only one router in the network diagram? Is the 192.168.10.1 the LAN IP of the Archer AX50?

 

If that is the case, can I know how are the 192.168.1.x, and 192.168.30.x devices connected to the AX50? They are not in the local network of the AX50's and they cannot send or receive data if there is even no network gateway for them. I'm not sure how did you make it work on the old WDR3600, but I guess the previous network diagram may be different. Please confirm it again.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:No funciona las RUTAS ESTATICAS
2022-08-23 14:35:35

  @Kevin_Z 

 

If exactly in the network diagram there is only one router with the network 192.168.10.1 and it works perfectly with the WDR3600 router. I remember again that the only thing I want is to replace that router with an ARCHER AX50. 


The connection of the different networks such as:
192.168.10.X
192.168.1.X
192.168.20.X
192.168.30.X
They are made by ethernet cable in the same star-type network structure.

The point is that the network is fully functional in the diagram and with the WDR3600 router, and when I replace the ARCHER AX50 router and it is fully configured, it does not do inter-network routing. That is why I justify that the problem is in the AX50 ROUTER.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 470

Replies: 4

Related Articles
No funciona las RUTAS ESTATICAS
405 0
 No funciona
331 0
 No me funciona
1151 0
Bluetooth funciona pero el wifi No
122 0
 Extensor no funciona
380 0
 Mi extensor no funciona
529 12
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.