Official Release Deco M9 Plus 1.6.4
Current Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.4_Build_20240718
Release Note:
1. Improve the device stability;
2. Enhance the system security
---------------------------------------------------------------------------------------------------
History Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.3_Build_20231225
Release Note:
1. Fix the potential security vulnerability and its related problem.
2. Improve system stability and security.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.2_Build_20230906
Release Note:
1.Fixed the bug that parental control doesn't take effect.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.1_Build 20230403
Release Note:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. Fixed the bug that the built-in speedtest has low speed test results.
Notes:
1. This firmware downgrade could be done via firmware recovery-How to use firmware recovery.
2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
4. You may miss some new features when Deco is set to Access Point mode.
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP getting the 1.7.x line of firmware for the M9+ would be awesome. The new IoT network option and ECO mode would be great our devices. Full details across in the m5 firmware thread. More info on IoT network here with absence of M9+ in supported devices list.
Is there any other ways we can help show demand for further firmware upgrades?
- Copy Link
- Report Inappropriate Content
I have a major problem with 1.6.1 firmware, QoS isn't working at all, to test this, I set the total bandwidth to 100Mbps Download and 50Mbps Upload, my full speed is 300Mbps/150Mbps D/U.
Even with the above settings I'm still getting the full speed 300Mbps instead of 100Mbps, I tried to restart the units, changes the modes, nothing works, QoS is completely not limiting the speeds as it should, I didn't have this problem before 1.6.1 and QoS is a major thing for me right now.
What should I do?
- Copy Link
- Report Inappropriate Content
Hi, You could start a feature request here:https://community.tp-link.com/en/home/forum/2252
Personally speaking, I keep receiving firmware release requests on different models almost every day and the engineers are also asked to provide an update regularly in the community reports, though it didn't seem to speed up the process. Persistence will always make a difference and I still wish to get feedback every now and then.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi, nice to see you again.
Did you test the speed via the embedded "Test Internet speed" on the Deco APP?
Have you run a speed-test directly on the clients themselves?
I did not see you mentioned this issue before and did it just start recently?
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Test within Deco app gives me the full speed. (300Mbps)
Test with phones/other devices gives me full speed too. (300Mbps)
But the QoS settings is set to 100Mbps, that's why I said it's not working.
Before I think I mentioned QoS isn't working on any modes expect Gaming mode that apply the QoS speed correctly, now nothing works, all modes gives the same results.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the confirmation.
Since QOS is also part of HomeCare on Deco M9 Plus, I think the issue might be related to this post:
HomeCare Parental Control Suddenly Stopped Working
Please wait for a while and the solution will be ready very soon.
Thanks again and best regards.
- Copy Link
- Report Inappropriate Content
Thanks for clarifying, please let us know as soon as this problem is solved, I can't play online games without QoS.
- Copy Link
- Report Inappropriate Content
A quick question, my problem with QoS is a software problem right?
I contacted Tp-Link UK through email and they asked me to return the units and get a replacement and I think this is weird, my warranty is valid until November 2023.
Should I wait for the new update or just send it back for warranty like they told me?
- Copy Link
- Report Inappropriate Content
Hi, a hardware replacement would not help with the current QOS issue. It is more like a HomeCare service renewal and could be fixed via a software upgrade.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 111725
Replies: 440
Voters 2
