Official Release Deco M9 Plus 1.6.4
Current Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.4_Build_20240718
Release Note:
1. Improve the device stability;
2. Enhance the system security
---------------------------------------------------------------------------------------------------
History Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.3_Build_20231225
Release Note:
1. Fix the potential security vulnerability and its related problem.
2. Improve system stability and security.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.2_Build_20230906
Release Note:
1.Fixed the bug that parental control doesn't take effect.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.1_Build 20230403
Release Note:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. Fixed the bug that the built-in speedtest has low speed test results.
Notes:
1. This firmware downgrade could be done via firmware recovery-How to use firmware recovery.
2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
4. You may miss some new features when Deco is set to Access Point mode.
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Alexandre. Good initiative, I'm adding my thanks as well, keep up the good work, don't mind the nay-sayers too much.
- Copy Link
- Report Inappropriate Content
@Alexandre. First, I agree that in (probably almost) every forum there is always more negative then positive posts and it's a good thing to point out the positives. In this case i can't agree to say "better late then never" TP-Link still sells M9 devices and the support isn't good, lots of problems and lack of features.
Customers that bought the M5's and thought that the M9 would be an upgrade are getting a slap in the face because of missing essential features they had on M5's (ie: like selecting deco A needs to communicate with deco B and not deco C) I know that these features where not present when the deco's (M5/M9) got released since i was an early adopter, but again, these products are still worldwide available to buy in stores (!!!) and the M5's get pushed the latest firmware.
At this moment the 1.6.1 firmware has not been pushed to the M9's so imo TP-Link is still not done... so i can't say anything positive when a company is screwing over there (avarage) customers by letting a more expensive product be a downgrade.
- Copy Link
- Report Inappropriate Content
@gabardina I checked out of curiosity in the section to update devices and I have left the new version and I have already installed it for the moment it is going well.
- Copy Link
- Report Inappropriate Content
Hi
V2 M9s updated to 1.6.1 via the app.
Despite website showing 1.6.1 available for V1, app keeps telling me they're up to date (currently on 1.5.1)
How do I get the app to update my V1 M9s to 1.6.1?
I'm in the UK
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
wait! Your M9 V2 updated to 1.6.1 via the app??? Where do you live? I'm in the US and it's not available via the app. Thanks.
- Copy Link
- Report Inappropriate Content
Thank you @David-TP
I've been running 1.6.1 for several days now and no issues. The new 100Mb/s warning showed up for me as our in wall cabling doesn't support any faster. Hopefully any further firmware won't take a long thanks to the thorough testing of 1.6.x
- Copy Link
- Report Inappropriate Content
@David-TP Thank you so much for this release! I just updated my deco, and have now fixed an issues where my TV for some odd reason choose a deco further away causing in sometimes unstable connections. having the ability force it to a deco is appreciated!
- Copy Link
- Report Inappropriate Content
@David-TP
I have been using the new version 1.6.1 on two deco m9 plus v2
It seems IGMP Snooping options missing in deco m9 plus. I have went to the web interface and I am only able to see wan unicast option.
One deco is connected to the provider network and works as router mode. Second deco is connected via cable to 1st deco as backhaul.
Without this option I am having several problems with my Meo (provider) tv box. It was working fine until the upgrade.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the update.
IGMP Proxy & Snooping is enabled by default and supports IGMP v1/V2/v3 and the IGMP Feature on/off button on the web UI is to decide whether IGMP v3 only is required.
The firmware release note of 1.6.1 does not mention the removal of this option. Could you please refer to the following suggestions:
1. reboot the whole Deco M9 plus system once.
2. change a different web browser and log into the web interface again.
(Optional) if possible, please change a different Deco as the main Deco to see whether it made any difference:
How to Set up the Satellite Deco or a new Deco to be the Main Deco
If nothing changed, could you please send an email to support.forum@tp-link.com with the following information:
1. A screenshot on the web UI that IGMP is missing.
2. What issues do you have with the Meo TV box?
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 114162
Replies: 436
Voters 2
