Official Release Deco M9 Plus 1.6.4
Current Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.4_Build_20240718
Release Note:
1. Improve the device stability;
2. Enhance the system security
---------------------------------------------------------------------------------------------------
History Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.3_Build_20231225
Release Note:
1. Fix the potential security vulnerability and its related problem.
2. Improve system stability and security.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.2_Build_20230906
Release Note:
1.Fixed the bug that parental control doesn't take effect.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.1_Build 20230403
Release Note:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. Fixed the bug that the built-in speedtest has low speed test results.
Notes:
1. This firmware downgrade could be done via firmware recovery-How to use firmware recovery.
2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
4. You may miss some new features when Deco is set to Access Point mode.
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
When will this be out of beta and available via the app? Can someone from tplink respond?
- Copy Link
- Report Inappropriate Content
Feedback from the lazy TP-LINK support and developers...
So, no commitment at all.
And they mention "Soon". 2,5 YEARS after the previous release.
Can you all please request these people when they will release 1.6 for Deco M9 plus? When much people request for it, it could speed up things: zoe.ma@tp-link.com and ives.lin@tp-link.com
---
Dear Customer,
We cannot confirm the exact timing, the testing department will need to complete a complete series of tests to confirm that there are no general problems with the released firmware. If all goes well, the final round of testing will be completed soon.
- Copy Link
- Report Inappropriate Content
did it... don't think it will help much though...
I'm currently looking into other brands to upgrade to a wifi 6e/7 mesh network.
Other b.s. like not being able to select a wifi channel for deco's is "ok" / not the biggest issue for consumer usage
but not bringing simple fw updates while the cheaper version is already having all the features (for i don't even remember how long) is crazy.
And not even reply on your own community forum is insane!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@gabardine Thank you very much for your email.
@HopSaSam nice to see you again.
As for the release date, actually, you might see I mentioned several times that no ETA could be guaranteed. If there is, I am sure it will be updated here without hesitation.
Since the beta firmware has been tested for a while and the final round of testing will be completed soon as the engineer replies, the official firmware is on the way. So if the feature you are urgently needed is supported in the beta version, please use the beta firmware first while waiting for the official version. If it is not even supported in the beta firmware, It might not be supported on the official one either. If after installing the beta firmware, the network performance got downgraded and you could temporarily revert back to 1.5.6.
Thank you a lot.
Best regards.
- Copy Link
- Report Inappropriate Content
It would be great to get an official release of the 1.6 firmware for the m9 plus.
I rely on my wifi for working from home so would prefer non-beta firmware if at all possible.
- Copy Link
- Report Inappropriate Content
I received a 'marketing' email from TP-Link on February 10, 2023, with a blurb at the very bottom about firmware version 1.6.0
From the Team:
Our Community Forums have received a lot of attention this last week. You are now able to sort the order of replies. no more having to find the last page of a thread to stay up to date!
If you are a Deco user, you may also want to check for an available firmware update, as the 1.6.0 firmware has been released to additional models. Further Information regarding the features and supported models can be found on our Deco Forum Module.
https://community.tp-link.com/us/home/forum/topic/597476
The link went to this (US) TP-Link Forum post, which indicates that v1.6.0 has moved into official release for the M9Plus. However, as of today, 2-weeks later, it is still not showing up as official in either the Deco App, or in the TP-Link Download Center for V1 or V2 units. (https://www.tp-link.com/us/support/download/deco-m9-plus/v2/#Firmware)
So... what's the hold up here?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Good news, the M5 version has another update before the M9.... I just have no idea anymore why I ever upgraded to the more expensive M9 as all the new features and fixes are prioritized for the M5.
- Copy Link
- Report Inappropriate Content
@Frankie_G77 Thanks for your time and patience.
I see the official firmware 1.6.0 of Deco M9 plus is on releasing process. I think the firmware will be ready in the next two weeks.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 111849
Replies: 440
Voters 2
