Official Release Deco M9 Plus 1.6.4
Current Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.4_Build_20240718
Release Note:
1. Improve the device stability;
2. Enhance the system security
---------------------------------------------------------------------------------------------------
History Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.3_Build_20231225
Release Note:
1. Fix the potential security vulnerability and its related problem.
2. Improve system stability and security.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.2_Build_20230906
Release Note:
1.Fixed the bug that parental control doesn't take effect.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.1_Build 20230403
Release Note:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. Fixed the bug that the built-in speedtest has low speed test results.
Notes:
1. This firmware downgrade could be done via firmware recovery-How to use firmware recovery.
2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
4. You may miss some new features when Deco is set to Access Point mode.
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Yeah I'd be down to try an updated one. The 1.6 from 0823 is terrible so many device issues even with fast roaming and mesh turned off.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi xQuantum,
I'm currently working through a similar issue with support on the current 1.5.x firmware where 2.4GHz devices can't connect to my ethernet-backhaul connected satellite, but my problem only occurs if I let the Decos reboot in an uncontrolled manner. If I boot the main Deco and let it setting down (green light), then boot the satellites one at a time and let them settle, then boot the ethernet-connected satellite it all works perfectly.
Does your issue persist if you boot your Deco's in this sort of structured way? Just interested as it might be a similar problem to mine.
- Copy Link
- Report Inappropriate Content
@David-TP , I'm wondering why feedback and interaction always takes that long for this beta testing?
I'm (we're) facing this unstability for over 2 weeks without any progress.
This will not encourage me to do any future beta testing *ever* when we ever reach a stable release.
- Copy Link
- Report Inappropriate Content
Hi @David-TP ,
Here some first feedback on the 1.6.0 Build 20220908 Rel. 64420:
1. Upgrade of 1 Deco M9+ failed. Usually, I execute the upgrade twice (since it fails often), but this time, it looks like I'm unable to execute 2 times the same upgrade. Result: 1 Deco sticks on the previous version.
2. The Web-interface is buggy and shows a kind of black icons for the Deco's
3. Unable to load the System status: webinterface stuck. BTW: After a few days, I need to reboot the Main Deco before I can access the webinterface again.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@HopSaSam are other devices fixed or do they disconnect as well? I've got an s22u but Havnt noticed many disconnects mostly other devices( tv's, harmony hubs etc. )
- Copy Link
- Report Inappropriate Content
I would strongly advice NOT TO INSTALL the latest 2 updates, as they are only getting worst. Horrible to say so.
So, Deco_M9_V2_1.6.0_220823 and Deco_M9_V2_1.6.0_220908 are really junk.
Ever 3 to 5 minutes, my phone is disconnected (while just laying on the table).
Please don't install any more updates if you still want a useful network. JUNK.
- Copy Link
- Report Inappropriate Content
The downgrade fails here. I loaded several older versions (1.5.3, 1.5.6) to a Deco, but the device doesn't connect to the main deco anymore.
So, be aware that even the "recovery" tool seems to fail.
"Reliable smart", they say... What a joke.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 112385
Replies: 440