Deco M9 Plus 1.6.4

Deco M9 Plus 1.6.4

436 Reply
Re:Deco M9 Plus 1.6.0
2023-01-07 02:36:02

  @David-TP 

 

My DECO M9 plus v2.8 would only show a max of 500mbps download when speed testing through the app. Had to downgrade back to 1.5.6 for it to correctly get the speeds over ethernet again.

  0  
  0  
#144
Options
Re:Deco M9 Plus 1.6.0
2023-01-07 03:28:04

  @Stuart-M 

 

I started getting the 500mpbs "cap" right after installing 1.6.0 beta. Tried all the QoS 1000mbps stuff and no QoS. Only thing that fixed it was going back to 1.5.6. 

  0  
  0  
#145
Options
Re:Deco M9 Plus 1.6.0
2023-01-07 04:12:01

  @disableDHCPplz 

how did you reverse back to ver1.5.6? mine is HW ver 1.1. Can I just use web browser and upload ver 1.5.1 to reverse back without using any recovery utiliy?

 

Thanks

  0  
  0  
#146
Options
Re:Deco M9 Plus 1.6.0
2023-01-07 04:25:24 - last edited 2023-01-07 04:26:40

  @ThomasLwin 

 

I used the steps outlined here and on the first page of this thread.

You'll want to download the latest firmware for version 1.1 here.

 

Use method 2 "HTTP Uboot Method"

 

You'll need access to a PC and an ethernet cable. Just follow the steps in the first link and you should be good to go.

  0  
  0  
#147
Options
Re:Deco M9 Plus 1.6.0
2023-01-10 02:26:51

disableDHCPplz wrote

  @Stuart-M 

 

I started getting the 500mpbs "cap" right after installing 1.6.0 beta. Tried all the QoS 1000mbps stuff and no QoS. Only thing that fixed it was going back to 1.5.6. 

​​​​​  @disableDHCPplz 

 

My experience has been that the cap has been there since atleast 2020 which ever software was on it then as mine has never run at full speed, reset the units swapped them round etc nothing worked. If I use the ISP supplied router I get over 900mbps. Seems Tp-link have deeper problems. I've now lost automation settings on the decos since I updated the beta.

  0  
  0  
#148
Options
Re:Deco M9 Plus 1.6.0
2023-01-20 08:06:01 - last edited 2023-01-20 09:00:28

Any info if this update is still in development? Or is this beta version the "final"

After "upgrading" the home network from m5's to m9's it feels more of a downgrade since a lot of features are gone now. 

  0  
  0  
#149
Options
Re:Deco M9 Plus 1.6.0
2023-01-20 08:11:22

  @gabardine 

That's exactly the same feeling I have. I thought the upgrade would give me more but it looks like it's a downgrade. Very strange tactics TP link uses. It's like buying a more expensive car from the same brand but receiving less. 

  0  
  0  
#150
Options
Re:Deco M9 Plus 1.6.0
2023-01-20 08:14:22

  @David-TP 
Please provide us some insights. Getting no info from TP-Link at all is a bad sign...

  0  
  0  
#151
Options
Re:Deco M9 Plus 1.6.0
2023-01-20 11:43:08
Frankly, the firmware support has been bad ... There's no CVE patches nor improvement of the products. E.g USB It's unlikely that I will go back to TP Link ...
  1  
  1  
#152
Options
Re:Deco M9 Plus 1.6.0
2023-01-20 11:47:36

  @kbwang @David-TP 

For sure they abandoned their M9 Plus.

I've been participating in the beta testing of 1.6 and finally they stopped doing anything. 

So, dead promises, only cashing money without customs support.

  0  
  0  
#153
Options
Related Articles