Archer A5 not working only power light on
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I tried flashing OpenWRT C50 v4 on my Archer A5 v4 there was a power outage and now when I turn it on only the power light is on.
I tried recovering it via TFTP when I sniff the packages using wireshark only this shows up:
30997 2.989244 192.168.0.2 192.168.0.66 TFTP 60 Acknowledgement, Block: 15490
30996 2.989174 192.168.0.66 192.168.0.2 TFTP 46 Data Packet, Block: 15490 (last)
and then the router reboots
Hello @PalmaBG
As per your description, the router might be faulty or broken when you tried to install the OpenWRT firmware. It is actually not suggested to install third-party software in the Archer A5, which will void the warranty, and we will no longer provide the support for it. Check below:
You may search online to get some help and check if you can bring it back. Good Luck.
Hello @PalmaBG
As per your description, the router might be faulty or broken when you tried to install the OpenWRT firmware. It is actually not suggested to install third-party software in the Archer A5, which will void the warranty, and we will no longer provide the support for it. Check below:
You may search online to get some help and check if you can bring it back. Good Luck.