About configuration of the VLAN ID associated with the ATM

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

About configuration of the VLAN ID associated with the ATM

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
About configuration of the VLAN ID associated with the ATM
About configuration of the VLAN ID associated with the ATM
2022-06-29 07:42:30
Tags: #VLAN
Model: TD-W8961N  
Hardware Version: V4
Firmware Version:

Greetings,

 

I have a TD-W8961N DSL modem and I was having trouble entering the VLAN ID associated with the ISP .

There is no VLAN ID section on the PPP settings and I was having trouble figuring out which options I should use on the VLAN section under advanced settings.

 

Any help would be greatly appreciated.

 

Thank you

 

  0      
  0      
#1
Options
1 Reply
Re:About configuration of the VLAN ID associated with the ATM
2022-06-30 21:42:34

  @StrykerDelta 

 

There's no too much documents on how to use VLANs with TD-W8961N.

One source could be its user guide - Section 4.3.5.

The other source could be this guide (just as an example) on how you could use VLANs with TD-W8961N.

But beware that you could stuck like the user in this thread if you have a similar case.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#2
Options