Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > How to connect a new modem to my existing Deco network?

< Deco

How to connect a new modem to my existing Deco network?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to connect a new modem to my existing Deco network?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

GHMKK

2022-06-18 10:50:06

Posts: 2

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2022-06-18

How to connect a new modem to my existing Deco network?

2022-06-18 10:50:06

Model: Deco M4

Hardware Version:

Firmware Version:

Complete amateur here. I have an existing 3-station Deco 4R setup which works well. It is connected to a DSL cable modem. I have now moved from my ISP to a broadband mobile operator and they have provided me with a ZTE LTE modem.

I have set up the new LTE modem and it works great.

My question: How do I connect this new modem to my existing Deco network? The idea is to REMOVE the existing cable modem and add the new LTE modem with minimal disruption.

Thanks in advance

2 Reply

David-TP

2022-06-21 06:21:32

Posts: 12443

Helpful: 1716

Solutions: 1197

Stories: 9

Registered: 2020-04-14

Re:How to connect a new modem to my existing Deco network?

2022-06-21 06:21:32

@GHMKK

Hi, welcome to the community.

It is suggested you could check the current internet connection type on the Deco M4, and it is under Deco APP>More>Advanced>IPv4.

I think you need to use dynamic IP after changing to a ZTE LTE modem.

So if the current connection type is not dynamic IP, after removing the existing cable modem and adding the new LTE modem, you might need to manually change the connection type.

Thank you very much.

Best regards.

--------------------------

Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.

Deco X50-POE Survey

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

GHMKK

LV1

2022-06-21 14:01:39

Posts: 2

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2022-06-18

Re:How to connect a new modem to my existing Deco network?

2022-06-21 14:01:39

@GHMKK Thanks so much David-TP

After I posted my message, my local ISP support guy told me: "Just pull the cable out of the Deco and stick in the cable from the ZTE router!" I did that (with some trepidation) --- and it WORKED!

Thanks again. I appreciated the reply.

How to connect a new modem to my existing Deco network?

How to connect a new modem to my existing Deco network?

Information

Voters 1

Tags