TP-WPA8630P IGMP Snooping
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I want to know how to enable IGMP Snooping on the TP-WPA8630P
From what I can tell, I need it for IPTV.
Thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have a good understanding of basic networking, vlans, etc. I have a very simple setup with an ISP modem/router hg8245h, unifi Switch and 2 AP Lite.
I have 3 IPTVs on the network. When I turned on igmp snooping in the switch, the cable went down and after checking some logs, the packets were getting discarded of some sort. I know what igmp does and it's supposed to be great for video and streaming, basically multicast.
Had this happened to someone, because unifi support is not much help really.
- Copy Link
- Report Inappropriate Content
@VictorJohnsonan your IPTV is connected to the switch? It needs to support igmp Snooping
- Copy Link
- Report Inappropriate Content
@Solla-topee OK I guess....the switch does support IGMP Snooping so
- Copy Link
- Report Inappropriate Content
Hello @riahc4
Powerline devices support IGMP Protocol ( check spec here for details) can pass Multicast traffic to the network clients, and you do not need to set up IGMP snooping on the powerline device.
When router -- Powerline A___Powerline B --TV box (IPTV) --TV, you should be able to use IPTV service without extra settings on the powerline units.
If you have any questions, can I know your network map showing how is your powerline device is connected,
When router--TV box, can you use IPTV service?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 765
Replies: 5
Voters 0
No one has voted for it yet.