Changed DNS but VR600 V3 showing different?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Changed DNS but VR600 V3 showing different?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Changed DNS but VR600 V3 showing different?
Changed DNS but VR600 V3 showing different?
2022-04-16 04:11:28 - last edited 2022-04-18 00:53:54
Model: Archer VR600  
Hardware Version: V3
Firmware Version:

I went to Advanced > Network > Lan Settings > And entered 1.1.1.1 and 1.0.0.1 but on the status page it shows 81.139.56.100 and 81.139.57.100? If I type ipconfig /all it shows 1.1.1.1 and 1.0.0.1 correctly so what's going on here?

  0      
  0      
#1
Options
1 Reply
Re:Changed DNS but VR600 V3 showing different?
2022-04-16 04:49:27 - last edited 2022-04-18 00:53:54

  @Steve.H 

 

The status page shows the DNSs provided  by your ISP. If you want to change them go here:

 

 

DNSs set in Advanced > Network > LAN Settings are only valid for your LAN devices which obtain their IP settings by the VR600 DHCP server.

If you change your ISP DNS settings there's no need to make the change in Advanced > Network > LAN Settings.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options