Does Deco support separate 2.4GHz and 5GHz SSIDs?
Deco supports disabling 2.4GHz and 5GHz separately under the Main/Guest/IOT networks.
As for separate SSIDs over 2.4GHz and 5GHz, it might not be completed via a single network, But you could set the Main Network to 5GHz only, and then create a different SSID for the 2.4 GHz only IOT network.
“One Network” is widespread in Mesh networks in order to enjoy seamless roaming, which is different from non-mesh traditional routers that require you to connect to the band you want manually. So we tend to remain one SSID per network, and Deco keeps its network simple by automatically choosing the band that gives you the best wireless roaming experience. It uses the same name for both the 2.4ghz and 5ghz bands under the same network. Both radio bands are active simultaneously. If the device is only compatible with 2.4 GHz, then it won't try to connect to 5 GHz. And if it supports both, it will connect to only one radio band at any given time. Based on the device's capabilities, the Band Steering feature of Deco will attempt to guide your connected devices to the band with the best performance.
So if you want separate SSIDs over 2.4 GHz and 5GHz Wi-Fi here is what you could do:
- Turn off 2.4 GHz under the Main Network.
- Enable the IOT network with a different SSID under 2.4 GHz only.
Related Articles:
Why do my clients not roam/connect to the nearest Deco node?
What is Deco Mesh and How it works?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP Combining 2.4Ghz and 5Ghz is fine for simple users. But it is hell to deal with with 2.4Ghz-only IoT devices. I also dont want my phone randomly connecting to 2.4Ghz.
I'm returning my unit. Such a simple feature, yet not available. Pathetic.
- Copy Link
- Report Inappropriate Content
@David-TP has anyone noticed there is no longer an option for a 6ghz dedicated wireless backhaul in the app anymore? Not saying it's not using this feature, it's just the setting seemed to have disappeared.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP create a guest network and then you can pick one of the frequencies
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have had huge problems since switching to Deco mesh. Everytime I have to connect a smart device it takes a long time of just trying over and over agian to get it to connect. Also my work laptop wil no longer autoconnect to neither main og guest wifi and often will not manually connect also!?
With previous Amplifi HD mesh this was never a problem and I could have seperate SSID for 2.4 and 5Ghz, wich SHOULD 100% be an option for ANY router or network!?
Is there a hardware limitation prohibiting this feature or are TPlink just lazy and or stupid?
They say you can use IoT og guest and set 2.4 only, but are these allowed to talk to the main network then?
- Copy Link
- Report Inappropriate Content
i ordered the deco xe75 pro couple of days ago and i just finished setting it up
Now im realizing that I cannot split the 2.4 from the 5
I will literally return the product
- Copy Link
- Report Inappropriate Content
@Aljewari setup guest work, enable local access, set it to 2.4ghz only. Set your main network to 5ghz only. Congrats you have now split the bands. You lose the guest network as it becomes your 2.4ghz band. I tried to use IOT network first but was super unstable, so I ended up doing this and its working great.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
These needs to be implemented asap - on further testing the guest network becomes extremely sluggish. Perhaps there is firmware limitations that throttles it but it becomes unusable for cameras. I ended up setting 2 decos in AP mode as 2.4ghz only and another 2 decos as 5ghz only. This has been the only stable solution for me to split the bands effectively
- Copy Link
- Report Inappropriate Content
Information
Helpful: 93
Views: 148989
Replies: 153
Voters 87
