USB Adapter : AC 600 Archer T2U Plus (US) does not function as expected

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

USB Adapter : AC 600 Archer T2U Plus (US) does not function as expected

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
USB Adapter : AC 600 Archer T2U Plus (US) does not function as expected
USB Adapter : AC 600 Archer T2U Plus (US) does not function as expected
2022-02-15 07:09:19
Model: Adapter  
Hardware Version: V1
Firmware Version:

Hi,

I have recently purchased a USB Adapter : 

Model : TP Link AC600 Archer T2U Plus (US)

Issue:

---------
- The adapter connects initially and I put it on 5.0GHz, works for a couple of hours, and suddenly disconnects.

- Moreover, after disconnecting, if I try to take out the adapter, and plug it back into the USB Port, it doesn't even get detected.
- The only way I can resume the detection is after rebooting the OS, and then the adapter gets detected.

- Eventually, again, after a couple of hours the same problem repeats.

 

I am using a laptop that is running Windows 10 on it!

 

Please help/advice.

 

Regards,

Rohan 

  0      
  0      
#1
Options
1 Reply
Re:USB Adapter : AC 600 Archer T2U Plus (US) does not function as expected
2022-02-17 02:48:31

 Hello  @rohan_deshpande 

For 5Ghz WiFi unstable issue, 

1.  Try a different Wi-Fi channel on the router, for 5Ghz band channel 36/40/44/48 are recommended 
Scan nearby wireless channels using  inSSIDer/Wi-Fi Analyzer app and select a less-crowded Wi-Fi channel on the router.

2. Try the chipset driver and see if that helps with performance: 
Realtek Chipset Driver for T2U(Nano/ Plug)
 

 

if the same, can I know the model of router, may I have a photo of router's Wireless settings? Can you take a photo of PC motherboard information: 

How to check driver version of TP-Link adapters and system information of your computer?

  0  
  0  
#2
Options