Home Network Community > Wi-Fi Routers > AX3000 Remote Access
< Wi-Fi Routers

AX3000 Remote Access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX3000 Remote Access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX3000 Remote Access
AX3000 Remote Access
2022-01-23 21:23:33
Model: Archer AX3000  
Hardware Version:
Firmware Version:

Hi, 

 

I have an AX3000 that recently replaced an AC1900. I've used remote access to this remote location for years using DDNS and also have a number of devices accessible via port-forwarding.  I can get to my hosts that use port forwarding, but can not get to the AX3000 login page remotely at either the HTTPS : 443 or the HTTP: 80 ports. (yes, it is enabled.) With the port-forwarding working fine, this is not a DDNS/IP address issue, It appears to be a bug in the router. Is anyone else having issues?

 

One thing that I haven't tried yet: I have used 192.168.1.254 as the LAN gateway for some time and that is what I use on this router. It surely shouldn't effect remote access, but it has occurred to me maybe there is a bug that only I would see because most people use the default gateway of .1.

 

Any insights or things to try would be appreciated. As I mentioned, port forwarding works fine, so I can get to my other devices at this site remotely. Just not the router itself.

 

Rob

  0      
 
  0      
 
#1
Options
3 Reply
Re:AX3000 Remote Access
2022-01-24 01:57:49

@RPV2019 

 

The router LAN IP address shouldn't matter when using a remote access.

Try setting the HTTP to other port (like 8080 for example) and test again.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:AX3000 Remote Access
2022-01-24 02:52:20

@terziyski 

 

i have tried http when set to 8080 and a few other ports. The router doesn't seem to reply at all to either the http ports or https at 443. I have tried turning the firewall on and off and also obviously rebooted several times, 

 

have been hoping others would be having the same problem so i could call it a bug and not something more difficult to find!
 

Rob

  1  
  1  
#3
Options
Re:AX3000 Remote Access
2022-01-24 13:19:18 - last edited 2022-01-24 13:23:20

@RPV2019 

 

I presume you're using http://<DDNS>:8080 when trying to access the AX3000 remotely on port 8080.

You are trying to access the AX3000 by its DDNS from an external network, not from your LAN ?

Do you have any devices before the AX3000 like an ISP modem/router, etc. - describe your network topology.

Is your AX3000 WAN IP address public ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 1025

Replies: 3

Related Articles
AX3000 can not access docker containers on LAN
790 0
AX3000 and Isolated C50 access point
299 0
I can't access Internet with my Archer AX3000
94 4
AX3000 differences
855 0
AX3000 MOCA SUPPORT
1669 0
AX3000 low security
732 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.