Rejected request from RFC1918 IP to public server address
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
when I tried to access my router remotely with my public IP, its reply a message-
"Rejected request from RFC1918 IP to public server addres"
what should I do? please I need help in details.
I'm not an expert..
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Which service on your router are you trying to access?
Is it the router's web interface via port 80 or 443?
- Copy Link
- Report Inappropriate Content
This usually happens when you try to access your router by its public (WAN) IP address from your LAN.
If that's the case and you are in your home network try accessing the router's WebGUI by its LAN IP address (192.168...) or http://tplinkwifi.net
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Open in a web browser the following URL:
https://www.whatsmyip.org/
Check if the IP address shown in the browser is 103.225.93.100.
If they don't match then tha't the reason for the message in question.
If they match try to move the remote management to a different port (for ex. from 80 to 8080) and test again.
If you still have this issue you should contact the tech support for further assistance.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8554
Replies: 5
Voters 0
No one has voted for it yet.