Home

Forums

Stories

Knowledge Base

Home Network Community > SOHO Switches > Printer connection not operating

< SOHO Switches

Printer connection not operating

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Printer connection not operating

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mike121

2021-12-29 12:28:06

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-12-29

Printer connection not operating

2021-12-29 12:28:06

Model: TL-SG105E

Hardware Version: V5

Firmware Version:

Having problems getting printer to work with switch Port 3 which is enabled. Flow control config is 'on' but Actual shows 'off'. - Not sure if this is the problem.

Internet is running ok through switch.

I have the MTU VLAN enabled with uplink port as 1 - which goes to laptop - is this correct?. Connection to virgin router is via port 2.

Also there is no 'save' tab to save the set up configuration once I get it set up properly.

Any help welcome.

Thanks

2 Reply

Philbert

LV5

2021-12-29 16:06:55

Posts: 2607

Helpful: 1559

Solutions: 274

Stories: 0

Registered: 2020-11-08

Re:Printer connection not operating

2021-12-29 16:06:55

@Mike121

Hey

Im guessing you have a virgin router, this switch and some PCs / Laptops connected too the switch

In that case you do not need any MTU or VLAN on the ports, VLANs are designed to route traffic between different segmented networks and with your hardware its not required (the virgin box wont support vlan)

The best option is to reset the ports back to the default vlan (0 or 1 if I remember) which will operate the device as a regular switch. Uplink Ports (trunks as they are known) are for connecting 2x or more switches and not for end devices such as PCs/Printers.

The printer is likely due the VLAN you have in place, I would recommend you remove all VLANs or reset the switch and try again. With your setup you should not require any configuration on the switch

terziyski

LV7

2021-12-30 03:45:41

Posts: 7118

Helpful: 5335

Solutions: 1207

Stories: 7

Registered: 2013-10-12

Re:Printer connection not operating

2021-12-30 03:45:41

@Mike121

Just to visualize your questions:

As suggested disable MTU VLAN to set the switch as a regular one:

To save any change you've made instantly click on Apply button.

If you still have issues a factory default settings can be initiated here:

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Printer connection not operating

Printer connection not operating

Information

Voters 0

Tags