M4 - I would like to see my 3 NAS servers , which are on my LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

M4 - I would like to see my 3 NAS servers , which are on my LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
M4 - I would like to see my 3 NAS servers , which are on my LAN
M4 - I would like to see my 3 NAS servers , which are on my LAN
2021-12-11 08:37:27 - last edited 2021-12-11 14:17:41
Model: Deco M4  
Hardware Version: V2
Firmware Version: 2.9.24

Hi,

 

I have a LAN on 192.168.1.xxx coming from my 2nd router (Sitecom WLR-9500)

 

On this LAN , I have 2 x Synology NAS & 1 Thecus NAS

 

On this router ,my main M4 unit is connect via a CAT6 cable

 

The unit creates a WLAN : 192.168.68.1

 

obviously , these 2 networks have a different IP address , causing my DECO WLAN not to see my other LAN, which I would like to enable

 

What is the best way to do that ?

 

Many thanks in advance for your help

 

KR, Sven

  0      
  0      
#1
Options
1 Accepted Solution
Re:M4 - I would like to see my 3 NAS servers , which are on my LAN-Solution
2021-12-11 13:20:48 - last edited 2021-12-11 14:17:41

@svengun 

 

The best way to solve that issue is to reconfigure Deco to run in Access Point mode. That will bring all your devices, wired and wireless, to the same 192.168.1.* network and they will be able to communicate with each other.

 

This is where you can do that change in Deco app, under More/Advanced:

 

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:M4 - I would like to see my 3 NAS servers , which are on my LAN
2021-12-11 09:15:02
just updated to new fw 1.5,2 20210916 Rel 56193
  0  
  0  
#2
Options
Re:M4 - I would like to see my 3 NAS servers , which are on my LAN-Solution
2021-12-11 13:20:48 - last edited 2021-12-11 14:17:41

@svengun 

 

The best way to solve that issue is to reconfigure Deco to run in Access Point mode. That will bring all your devices, wired and wireless, to the same 192.168.1.* network and they will be able to communicate with each other.

 

This is where you can do that change in Deco app, under More/Advanced:

 

Recommended Solution
  0  
  0  
#3
Options
Re:M4 - I would like to see my 3 NAS servers , which are on my LAN
2021-12-11 14:17:23

@Alexandre. 

 

Great , this did the job !

 

I'm very happy , even streaming 4K BR disc images (80+ GB files) works with M4 !!

 

Thanks & have a great weekend !

 

KR, Sven

  0  
  0  
#4
Options