TP-WR702N don't work as client, and other stuff...
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-WR702N don't work as client, and other stuff...
Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
Hi guys
I bought the TL-WR702N to connect to my wireless network a LaCIE multimedia HD. To do this I need to use it as client mode.
So I have followed the user guide instructions but when i clicked the SURVEY button the only wifi network not founded was mine!!!
I try to refresh many times but nothing happened.
So I put manually SSID and MAC address, security mode and password, then rebooted.
Status information indicated that my SSID was setted as client mode on my wifi network, but led light on TL-WR702N was solid, indicating that it was not connected.
I tryed different times but everytime the same: solid light, no connection available.
So I changed the channel of my D_Link router from channel 12 (best channel) to channel 1: this time TL-WR702N fownded my network! So i realized that TL-WR702N works from channel 1 to channel 11 but this is axplayned anywhere... :(
Anyway, I was sure that now everything was OK. No way. Same old story. Once I rebooted, led light solid, no connection founded.
I sent an email to tp-link assistance saing my problem and the short answare was "be sure to insert the right country". :mad: Who do he think I am? And anyway if you set the county using the quick setup after the reboot the country is set to default USA... You must to put the right country on the wireless set page.
I'm afraid I have put my money in the trash buyng this object...
Anybody ave some ideas to fix my problem?
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
Hi guys
I bought the TL-WR702N to connect to my wireless network a LaCIE multimedia HD. To do this I need to use it as client mode.
So I have followed the user guide instructions but when i clicked the SURVEY button the only wifi network not founded was mine!!!
I try to refresh many times but nothing happened.
So I put manually SSID and MAC address, security mode and password, then rebooted.
Status information indicated that my SSID was setted as client mode on my wifi network, but led light on TL-WR702N was solid, indicating that it was not connected.
I tryed different times but everytime the same: solid light, no connection available.
So I changed the channel of my D_Link router from channel 12 (best channel) to channel 1: this time TL-WR702N fownded my network! So i realized that TL-WR702N works from channel 1 to channel 11 but this is axplayned anywhere... :(
Anyway, I was sure that now everything was OK. No way. Same old story. Once I rebooted, led light solid, no connection founded.
I sent an email to tp-link assistance saing my problem and the short answare was "be sure to insert the right country". :mad: Who do he think I am? And anyway if you set the county using the quick setup after the reboot the country is set to default USA... You must to put the right country on the wireless set page.
I'm afraid I have put my money in the trash buyng this object...
Anybody ave some ideas to fix my problem?
