Home Network Community > Wi-Fi Routers > DynDNS settings
< Wi-Fi Routers

DynDNS settings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DynDNS settings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DynDNS settings
DynDNS settings
2021-12-06 12:31:19
Model: Archer AX6000  
Hardware Version: V1
Firmware Version:

I am trying to use the TP-Link dyndns and I have created my domain xxxxx.tplinkdns.com, the status is "bound" but the moment I leave those settings and I return to them again it is back on DynDNS. How do I make the xxxxx.tplinkdns.com permanent?

  0      
 
  0      
 
#1
Options
10 Reply
Re:DynDNS settings
2021-12-07 06:49:35 - last edited 2021-12-07 08:19:16

@EHM 

 

Make sure that you're with the latest FW release for your device.

In your user guide - Chapter 12.5 is described how to use Dynamic DNS feature of your router.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:DynDNS settings
2021-12-07 07:50:55

@EHM 

 

Where did you see it is on DynDNS? Is there an existing rule once you save the TP-Link DNS settings on the Dynamic DNS page? Please post a screenshot.

 

BTW, there is a guide you can refer to configure TP-Link DNS on the router:

https://www.tp-link.com/support/faq/1367/

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:DynDNS settings
2021-12-07 08:41:27

@EHM 

the firmware is up to date:

When I go to the Dynamic DNS settings I get:

 

Then I select TP-Link:

and all looks fine but when I leave the settings and go back again it shows the DynDNS settings again.

I deleted all the DynDNS settings, selected "Logout" and it looks like this:

 

 

but it keeps coming back.

I want to end the DynDNS service but only when I am sure the TP-Link on is active

 

  0  
  0  
#4
Options
Re:DynDNS settings
2021-12-07 08:51:57

@EHM 

 

Have you tried to ping my-dnsname.tplinkdns.com URL and see if the reply is from your router's WAN IP address (your public IP address) ?

If it is, then the registration was successful. Logout the local admin account and then login with your TP-Link ID account to see if my-dnsname.tplinkdns.com binding persists:

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#5
Options
Re:DynDNS settings
2021-12-07 09:09:37

@terziyski I always login with the TP-Link ID account, how do I go back to the local?

  0  
  0  
#6
Options
Re:DynDNS settings
2021-12-07 09:10:43

@terziyski By the way the ping is ok

  0  
  0  
#7
Options
Re:DynDNS settings
2021-12-07 09:21:24

@EHM 

 

If the ping reply is OK then my-dnsname.tplinkdns.com binding is successful.

How to login with local admin account:

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#8
Options
Re:DynDNS settings
2021-12-07 09:27:54

@terziyski I don't get the local password option

 

  0  
  0  
#9
Options
Re:DynDNS settings
2021-12-07 09:43:11

@EHM 

 

Try another browser or incognito/private browser window to see if any difference.

If still don't see that option you may try resetting the router to factory defaults and re-configure from scratch - in many cases that improves device's behavior.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#10
Options
Re:DynDNS settings
2021-12-07 10:13:07

@terziyski Factory defaults is the very last thing I will do, I have quite a lot of static IP addresses and not looking forward setting them all up again.

Different browser or private did not make a difference.

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 922

Replies: 10

Related Articles
ddns authentication failure with dyndns
1023 0
 Problem with dyndns service and mail setting
565 0
 DynDNS DDNS Support
7913 0
 M7350 DynDns HowTo
845 0
 DynDNS is rather limited
343 3
 Dyndns - virtual servers
470 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.