Home Network Community > Deco > Deco M5 - Port Forwarding - device connected but not listed
< Deco

Deco M5 - Port Forwarding - device connected but not listed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M5 - Port Forwarding - device connected but not listed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M5 - Port Forwarding - device connected but not listed
Deco M5 - Port Forwarding - device connected but not listed
2021-12-03 14:44:35 - last edited 2021-12-07 02:37:58
Model: Deco M5  
Hardware Version: V2
Firmware Version: 1.5.7 Build 20210819 Rel. 43499

I configured my alarm system for my Deco M5 Network. When listing the devices with "arp -a" it shows the mac address and the IP as present in the network. However it is not listed in among the devices in the app (Section Port Forwarding or IP Reservation). How can I configure the port forwarding to a connected, but not listed device?

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Deco M5 - Port Forwarding - device connected but not listed-Solution
2021-12-06 14:52:43 - last edited 2021-12-07 02:37:58

 

Markus57 wrote

@TP-Link Yes, the device can only be configured with a static IP. I will try the workaround you suggested. Thanks !

@Markus57 Problem solved. Instead of changing the DHCP range I reserved the port for the device. It appears to work!

Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:Deco M5 - Port Forwarding - device connected but not listed
2021-12-06 07:49:23

@Markus57 

Hi, Thank you for your time and patience.

If you checked on the online list of Deco APP, I am afraid the alarm system is not there either, right?

Did the alarm camera get an IP address via DHCP or a static IP address?

And it is also suggested to have a look at this link:

Workaround - Forward port to missing device

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:Deco M5 - Port Forwarding - device connected but not listed
2021-12-06 09:19:52

@TP-Link Yes, the device can only be configured with a static IP. I will try the workaround you suggested. Thanks !

  0  
  0  
#3
Options
Re:Deco M5 - Port Forwarding - device connected but not listed-Solution
2021-12-06 14:52:43 - last edited 2021-12-07 02:37:58

 

Markus57 wrote

@TP-Link Yes, the device can only be configured with a static IP. I will try the workaround you suggested. Thanks !

@Markus57 Problem solved. Instead of changing the DHCP range I reserved the port for the device. It appears to work!

Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 1

Views: 894

Replies: 3

Related Articles
Port Forwarding not allowed from Ethernet/Wired device on Deco M5?
531 0
[SOLVED] Deco M5 port forwarding -- not working
16807 0
 Deco M5 port forwarding to a wired device NOT working
1161 0
 Deco M5 - Forwarding Port 80?
912 0
 Deco M5 Port Forwarding - NOT WORKING
3148 0
Deco M5 Port Forwarding not working? (Setting up a Java Minecraft Server)
6518 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.