Home Network Community > Wi-Fi Routers > After firmware update WiFi slow
< Wi-Fi Routers

After firmware update WiFi slow

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

After firmware update WiFi slow

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After firmware update WiFi slow
After firmware update WiFi slow
2021-11-30 09:00:46
Model: Archer AX90  
Hardware Version:
Firmware Version: 1.1.5

After latest firmware update, my WiFi will not go up more then 100 mbps. I am using fiber 1000mb before I got 800mbps.

  0      
 
  0      
 
#1
Options
22 Reply
Re:After firmware update WiFi slow
2021-11-30 12:53:55

@MrHau 

 

Make sure your Intvernet port has the appropriate speed:

 

If your Internet port is capped at 100 mbps then check these settings:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:After firmware update WiFi slow
2021-11-30 14:24:55
Have made reset and is back to normal, but then second day is again drop to 100 WiFi and lan both, now have reset router again will look inside setting if drop again
  0  
  0  
#3
Options
Re:After firmware update WiFi slow
2021-12-14 06:48:37

@MrHau 

 

Hello, is the speed back to normal after the reset?

 

MrHau wrote

Have made reset and is back to normal, but then second day is again drop to 100 WiFi and lan both, now have reset router again will look inside setting if drop again

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:After firmware update WiFi slow
2021-12-14 06:55:13

@Kevin_Z 

 

hi after reset and done the setting, the speed is back to normal but now I force with another problem, but am not sure is router problem or isp problem, almost everyday my connection with the internet is broken and after few seconds I have connections again I have called them and need to try plug out cable and insert direct to modem but there is no problem

 

thanks

  0  
  0  
#5
Options
Re:After firmware update WiFi slow
2021-12-14 07:05:56

@MrHau 

 

Thanks for getting back.

 

May I know who is your ISP? Before the firmware update, there was no issue? We would like to escalate your case to our engineers, the engineering team will investigate to see if it is a concern in the router that can be resolved.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:After firmware update WiFi slow
2021-12-14 07:09:57

@Kevin_Z 

 

my isp is cmhk 中國移動 my speed is 1000mbps 

before firmware update no problem 

  0  
  0  
#7
Options
Re:After firmware update WiFi slow
2021-12-14 07:17:26

@MrHau 

 

Thank you. I've forwarded your email address to the engineering team for a follow-up. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:After firmware update WiFi slow
2021-12-14 15:50:16

@Kevin_Z 

 

Hi I also want to say I got a msg from iPhone.  If I click on my router there is a privacy warning and says am blocking the dns traffic how to solve that problem.

 

  0  
  0  
#9
Options
Re:After firmware update WiFi slow
2021-12-15 01:24:18 - last edited 2021-12-15 03:21:15

@MrHau 

 

Regarding the "This network is blocking encrypted DNS traffic" message, we share what we have confirmed.


Ever since iOS 14, Apple started supporting encrypted DNS, and sometimes you might get this“ privacy warning: this network is blocking encrypted DNS ” notice on your iOS devices when they are connected to a network that did not support encrypted DNS. The Archer routers don't support encrypted DNS now, but they can forward the traffic to the DNS servers without an issue.


Try figuring this out, you can try the following:
1. Go to the Wi-Fi Settings of your iOS devices, forget/delete the network, then reconnect to it again. Check and confirm if the privacy warning will disappear.
2. If that doesn't help, try changing the DNS servers on the router to 8.8.8.8 and 1.1.1.1 (Under Advanced > Network > Internet) manually, then go to the Wi-Fi Settings of your iOS devices, forget/delete the network, then reconnect to it again.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options
Re:After firmware update WiFi slow
2021-12-15 02:28:20

@Kevin_Z 

 

I could not find how to manually change Under Advanced > Network > Internet).1 manually,

 

thanks

 

 

  0  
  0  
#11
Options
123

Information

Helpful: 0

Views: 2548

Replies: 22

Related Articles
 Wifi Very slow after firmware update
4841 0
 Wifi very slow after firmware update
110 1
Wi-Fi super slow after latest firmware update (X90)
587 0
 internet slow after firmware update
340 0
 2.4Ghz slow after latest firmware update
2398 0
 Firmware update caused slow internet
451 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.