I tried to flash OpenWrt to AC1750(RE450) and it failed and broke.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
(I chose AC1750(RE450) because it does not exist in the model name.)
I tried to put OpenWrt in AC1750(RE450). However, the flash failed and I got into a boot loop.
I can't connect to a computer.
I want to cure this on my own.
If anyone knows how to recover, please reply to this thread.
At the moment I'm running out of money to build a server and I want to cure this for free.
Please.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Follow this thread, try the suggested actions and see if you can get your router fixed by yourself.
The thread in question is for Archer AC1750 - Archer C7 v2 router. If the device is RE450 AC1750 I don't think that will work.
- Copy Link
- Report Inappropriate Content
Thank you for providing good information.
However, unfortunately I saw tftp, but there was no communication log from the router.
I don't want to give up yet.
Would you please join us in finding another way?
If necessary, attach the Wireshark log when the router starts.
- Copy Link
- Report Inappropriate Content
Did you give your machine an ip manually?
The tftp requests come to a press ip like 192.168.0.66 for example.
Also try using other tftp servers other than one in the link.
Try this once- https://downloads.linksys.com/downloads/Tftp.exe
- Copy Link
- Report Inappropriate Content
Thank you for providing the tool.
However, even this tool could not restore.
Is the restoration method a little different for RE450?
Can you see if there are other ways to restore it?
- Copy Link
- Report Inappropriate Content
@syuu22397 Can you upload the previously used tftp client log for your router? What file name does it request?
Ok so as far as i have learnt the RE series cannot be recovered :-(
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2042
Replies: 5
Voters 0
No one has voted for it yet.