Home Network Community > Range Extenders > One Mesh does not pick best signal with AX11000 and RE550
< Range Extenders

One Mesh does not pick best signal with AX11000 and RE550

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

One Mesh does not pick best signal with AX11000 and RE550

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
One Mesh does not pick best signal with AX11000 and RE550
One Mesh does not pick best signal with AX11000 and RE550
2021-11-21 08:23:47 - last edited 2021-12-12 10:26:09
Model: Archer AX11000  
Hardware Version:
Firmware Version:

Using One Mesh with AX11000 and RE550 it does not seem to switch to best signal when moving through the house.  It will stay on the RE550 even when right next to AX11000. This happens all the time on my iPhone and other devices. Any suggestions would be great. 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:One Mesh does not pick best signal with AX11000 and RE550-Solution
2021-11-24 03:53:26 - last edited 2021-12-12 10:26:09

Hello@paultj007 

Thank you for your post.  OneMesh will provide about roaming recommendations for clients ( phones, laptops etc.) and whether client steer to a different AP this is still decided byu client itself. It is possible that RE550 signal is strong enough to iphone or did not meet roam its thread hold , so iPhone choose to stick with extender's Wi-Fi signal. 

If that does not affect device real performance it should be fine, we found an article online introduces iOS devices roaming decision , this may help explain:    https://support.apple.com/en-us/HT203068

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:One Mesh does not pick best signal with AX11000 and RE550-Solution
2021-11-24 03:53:26 - last edited 2021-12-12 10:26:09

Hello@paultj007 

Thank you for your post.  OneMesh will provide about roaming recommendations for clients ( phones, laptops etc.) and whether client steer to a different AP this is still decided byu client itself. It is possible that RE550 signal is strong enough to iphone or did not meet roam its thread hold , so iPhone choose to stick with extender's Wi-Fi signal. 

If that does not affect device real performance it should be fine, we found an article online introduces iOS devices roaming decision , this may help explain:    https://support.apple.com/en-us/HT203068

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 501

Replies: 1

Related Articles
AX11000 OneMesh? Where is it?
4343 1
AX11000 OneMesh?
14543 1
AX11000 - One Mesh
1470 0
Ax11000 onemesh?
21424 8
AX11000 + RE505X = OneMesh
1689 0
AX11000 One Mesh Support...when?
948 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.