Modem & Router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Why a modem has to be turned off before connecting to a router?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, as far as I can tell, most cable modems remember the MAC address of the device they are attached to and will not allow a different MAC address to connect. Because of this if you put in a new router without rebooting the modem, rebooting generally refers to power off then power on, the new router will most likely not get an IP address from the cable modem and thus will not connect to the internet. Rebooting/Restarting the cable modem allows it to re-register the MAC address of the new router you have attached to it and all should work.
- Copy Link
- Report Inappropriate Content
Hello, as far as I can tell, most cable modems remember the MAC address of the device they are attached to and will not allow a different MAC address to connect. Because of this if you put in a new router without rebooting the modem, rebooting generally refers to power off then power on, the new router will most likely not get an IP address from the cable modem and thus will not connect to the internet. Rebooting/Restarting the cable modem allows it to re-register the MAC address of the new router you have attached to it and all should work.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 618
Replies: 2
Voters 0
No one has voted for it yet.