Home Network Community > Powerline Adapters > 2 x AV 1300 kit aber 3 Probleme
< Powerline Adapters

2 x AV 1300 kit aber 3 Probleme

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

2 x AV 1300 kit aber 3 Probleme

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
2 x AV 1300 kit aber 3 Probleme
2 x AV 1300 kit aber 3 Probleme
2021-10-31 11:07:50 - last edited 2021-11-11 09:11:51
Model: Adapter  
Hardware Version: V3
Firmware Version: unbekannt da 2 verschiedene gleichzeitig angezeigt werden

Hallo Leute,

 

Ich habe 2 AV-Kits aber 3 verschiedene Probleme.

 

Ich fang mit dem Kit AV1300 Gerät TL-WPA8631P an.

 

1 Problem : Bei diesem 1 Gerät werden mir 2 verschiedene Firmenwareversionen angezeigt,wie kann das sein`?

 

2 Problem: Laut Software liegen auch ca. 650-700 mbps an.

Nur über die Leitung werden maximal mit gut Glück 220 Mbit/s übertragen.(Daten von Laptop zum NAS)

Wie kann das eigentlich sein.

 

Ich hoffe es kann mir jemand einen Rat geben.

 

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:2 x AV 1300 kit aber 3 Probleme-Solution
2021-11-02 06:00:39 - last edited 2021-11-11 09:11:51

Hello @Mondsucht ,

Thank you very much for photos, I checked your case with our engineer and was told it is a pretty good throughput between the powerline units. 

TpPLC Utility shows the powerline rate between two powerline units, which is an indicator for the powerline environment. But the real throughput.  Based on our laboratory test in the ideal environment with very few powerline noise, the actual throughput between the powerline units is around 35% of the powerline rate on tpPLC Utility: 

For more details refer to explanation here: https://www.tp-link.com/support/faq/2928/

 

Your iPerf test shows a  throughput  around 50 MB/s, which is 400 Mb/s, that is very reasonable when power line rate on the tpPLC Utility is 600-700Mbps, which is more than 50% than the powerline rate, so that is very good performance for  your powerline units.

 

 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  0  
  0  
#6
Options
5 Reply
Re:2 x AV 1300 kit aber 3 Probleme
2021-11-01 06:58:05 - last edited 2021-11-01 06:59:58

Hello @Mondsucht ,

1. The Build number 20210514 on Web UI is the firmware of wireless powerline unit,  the version on tpPLC Utility  could be neglect for a wireless unit. 

While for wired power line unit, the version on Utility shows the correct firmware version. 

 

 

2. The transfer speed between PC and NAS should be partly related to the Wi-Fi Link speed: How to check the associated/link speed on a wireless client

Does your laptop connect to 5Ghz Wi-Fi of WPA8631P? AV1300 supports Wi-Fi Link speed 867 Mbps on 5 GHz, please check if your laptop has reach 867Mbps (* this requires the network adapter also supports 857Mbps on 5Ghz), if not, try to go to Wireless settings-> change 5GHz channel width to 80Mhz. 

It is also suggested to contact NAS support and see get more professional suggestion on the NAS transfer speed or  what could affect the NAS transfer speed? 

 

 

 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:2 x AV 1300 kit aber 3 Probleme
2021-11-01 07:07:48

@Solla-topee 

 

Das WLAN von dem Kit hab ich ausgeschalten.

 

Es soll alles nur über die Stromleitung laufen,

 

Es liegt nicht am Nas den wenn ich das Gerät direkt Laptop/Router/Nas verbinde hab ich die volle Leistung.

 

Geh ich per LAN über das Powerline bricht die Rate zusammen auf die beschriebenen 220 mbits.

 

 

  0  
  0  
#3
Options
Re:2 x AV 1300 kit aber 3 Probleme
2021-11-01 09:36:01

@Mondsucht 

Your concern is with the 1>  Slow transfer speed from Laptop to NAS  OR  2. The real speed test is slow e.g. slow speed test via speedtest.net? 


For  1: please compare the transfer speed when laptop connected to Router/ WPA8631, and provide a photo

Can I know your network map/ network tpology? 

 

For  2: Here is FAQ about the Powerline Rate (650-700 mbps in your case) and Actual speed of the Powerline Adapters which may help to explain better:
https://www.tp-link.com/support/faq/2928/

 

I might not get your concern correctly, you could contact our local support with case details mentioned in the forum, they will provide further help, thank you for your understanding!

https://www.tp-link.com/support/contact-technical-support/#Hotline-Support

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#4
Options
Re:2 x AV 1300 kit aber 3 Probleme
2021-11-01 10:27:48 - last edited 2021-11-01 11:49:19

@Solla-topee 

 

die Leistung liegt nicht an der Fritzbox oder dem Nas ,den ohne die Powerline bekomme ich 112 mb/s per lan anschluss-siehe Bild.

 

Ich sollte einen Test mit einer 3er Steckdose machen. Da bekomme ich maximal 50 mb/s aber das ich auch nicht viel wenn man bedenkt , das die 2 Geräte in einer verschiedenen 3er Dose stecken.Ich habe es mit 2 Mehrfachdosen versucht und das Ergebnis bleibt bei maximal 50 mb/s

 

 

Das letzte Bild zeigt die Leistung an ,die im selben Raum sind

 

  1  
  1  
#5
Options
Re:2 x AV 1300 kit aber 3 Probleme-Solution
2021-11-02 06:00:39 - last edited 2021-11-11 09:11:51

Hello @Mondsucht ,

Thank you very much for photos, I checked your case with our engineer and was told it is a pretty good throughput between the powerline units. 

TpPLC Utility shows the powerline rate between two powerline units, which is an indicator for the powerline environment. But the real throughput.  Based on our laboratory test in the ideal environment with very few powerline noise, the actual throughput between the powerline units is around 35% of the powerline rate on tpPLC Utility: 

For more details refer to explanation here: https://www.tp-link.com/support/faq/2928/

 

Your iPerf test shows a  throughput  around 50 MB/s, which is 400 Mb/s, that is very reasonable when power line rate on the tpPLC Utility is 600-700Mbps, which is more than 50% than the powerline rate, so that is very good performance for  your powerline units.

 

 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 655

Replies: 5

Related Articles
AV 1300 Gigabit Powerline ac Wi-fi Kit.
1590 0
 Kanal ändern bei Powerline AV 1300
451 0
 TL-PA9020P randomly drop connection (AV 2000 kit of 2)
856 0
install 2 X av600 powerline wifi kit
698 0
TL-WPA8631P KIT (of 2). Can I add another (3rd) adapter?
1913 1
TL-PA8033P KIT (TL-PA8010P + 2 x TL-PA8030P) frequently disconnects
1816 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.