Home Network Community > Wi-Fi Routers > Archer AX1500 Slow 2.4G network
< Wi-Fi Routers

Archer AX1500 Slow 2.4G network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX1500 Slow 2.4G network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX1500 Slow 2.4G network
Archer AX1500 Slow 2.4G network
2021-10-20 07:46:45
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.2.1 Build 20210513 Rel. 79745(5553)

I have just installed a AX1500 in my house and I find the 2.4Ghz network providing les than 1/10th of the actual speed available, even when the 5G band is providing the full speed. I have about 60 devices connected to this at a time, most of which are smart home devices working in 2.4g. I find the lack of speed a major issue with this device. I have contacted technical support and they said to try changing the channel to either 4 or 6 or 11. I have tried that without any success, What can be done?

 

Also what is maximum number of devices this router can handle RELIABLY?

  0      
 
  0      
 
#1
Options
7 Reply
Re:Archer AX1500 Slow 2.4G network
2021-10-20 14:29:07

@sheminasalam 

 

Changing the channel for 2.4 GHz has been suggested to avoid possible wireless interference from your neighbours, if you live in highly congested area.

That could be checked with a software like this one - https://www.metageek.com/products/inssider/

If that doesn't help the you can try lower the number of connected devices (by powering them off) and see if that will improve the 2.4 GHz band speed.

In general the AX1500 should be able to handle about 25-30 devices at 2.4Ghz band - it supports WI-Fi 6 only on the 5 GHz band.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Archer AX1500 Slow 2.4G network
2021-10-20 14:53:14 - last edited 2021-10-20 14:54:08

@terziyski Are you sure that it can only support 25 to 30 devices?

 

Actually I have only 25 devices connected to the AX1500 directly in 2.4G. And about 5 devices in 5G. The rest of the devices are connected through a access point. I have checked the congestion of the band but it seems to fine. There are absolutely no overlapping spectrums, even my access point is working in a different channel. Considering the numer devices is just 25, I still dont know why this issue is happening. Could it be any hardware issue with the router? 

  0  
  0  
#3
Options
Re:Archer AX1500 Slow 2.4G network
2021-10-20 17:08:42 - last edited 2021-10-23 12:05:08

@sheminasalam 

 

On the bottom sticker you can see which FW region device is and the HW version.

I believe you have the HW v1.2.

Here are the latest FW release notes:

" 5. Increased the maximum wireless clients of single-band network from 64 to 128 "

So the number of devices shouldn't be a problem.

Try these wireless settings:

 

 

And additional settings:

 

 

Finally, if you're not using OneMesh feature turn it OFF.

 

For a brand new device, a hardware issue is highly unlikely.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Archer AX1500 Slow 2.4G network
2021-10-23 07:36:46
sorry for late reply. I have tried with your settings but still the same issue.
  0  
  0  
#5
Options
Re:Archer AX1500 Slow 2.4G network
2021-10-23 11:48:34

@sheminasalam 

 

Have you tested the connection speed with fewer devices connected to 2.4 GHz band ?

If there's no wireless interference around you and the router settings are fine, then that would be next thing to test to exclude a hardware issue.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Archer AX1500 Slow 2.4G network
2021-10-23 11:59:46
I believe its not a hardware issue because I returned the router and got a replacement today which again is showing the same issue. Also the customer care of TPlink has said it can support way above than 25 devices in 2.4G
  0  
  0  
#7
Options
Re:Archer AX1500 Slow 2.4G network
2021-10-25 08:12:04

@sheminasalam 

 

Have you tried to fix the "Channel Width" setting to "40 MHz" for the 2.4GHz? Give it a go.

 

BTW, how did you test the speed? How about the link speed on that device that you are testing the speed? Verify that your client device actually supports dual-stream (2×2) and 40 MHz channel width operation. To do this you need to check on the client device if it reports a connection speed of 300 Mbps (or at least something between 200-300 Mbps).

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1293

Replies: 7

Related Articles
Problems with the archer ax1500
2442 0
 Network issues with Archer AX1500
842 0
 Archer AX3000 Slow 2.4G network
283 0
Archer AX1500 terrible upload speeds
1377 0
 AX1500 slow upload speed
4592 1
 Archer AX10 | AX1500
1239 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.