TL-WR1043ND doesn't recognize anything in LAN 1 and WAN ports
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR1043ND doesn't recognize anything in LAN 1 and WAN ports
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Hi, I've been using this router for almost 2 years and it has been excellent but since 2 weeks ago it has stopped recognizing anything connected to the LAN port 1 and the WAN port, so it becomes useless as a router because I cannot connect a cable modem. The cable modem was tested successfully with a direct connection to a computer but it doesn't work with the router, and also ANYTHING you connect to these ports on the router is not detected, the lights do not turn on.
Do you have any idea why this may happen and what can I do about it? I have tried a factory reset via the reset button but nothing changed.
Thanks!
Martin
PS: I haven't flashed anything in the router, I just came back from a trip and found it like this, and nobody had touched it. The cablemodem works ok, everything works, the router boots up but just that: anything connected to LAN 1 and WAN is not recognized.
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Hi, I've been using this router for almost 2 years and it has been excellent but since 2 weeks ago it has stopped recognizing anything connected to the LAN port 1 and the WAN port, so it becomes useless as a router because I cannot connect a cable modem. The cable modem was tested successfully with a direct connection to a computer but it doesn't work with the router, and also ANYTHING you connect to these ports on the router is not detected, the lights do not turn on.
Do you have any idea why this may happen and what can I do about it? I have tried a factory reset via the reset button but nothing changed.
Thanks!
Martin
PS: I haven't flashed anything in the router, I just came back from a trip and found it like this, and nobody had touched it. The cablemodem works ok, everything works, the router boots up but just that: anything connected to LAN 1 and WAN is not recognized.
