Can't see my print server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't see my print server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't see my print server
Can't see my print server
2013-04-29 19:51:36
Region : Belgium

Model : TL-WPS510U

Hardware Version : V2

Firmware Version : 6.04.48T build 0015

ISP : Telenet


Hi,

***************************************
* Print Server Test Page *
***************************************
Device Name: 1P_PrintServE951310000
Firmware Version: 6.04.48T build 0015
MAC Address: D8-5D-4C-**-**-**
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
Gateway IP: 192.168.0.1
AppleTalk Status: Enabled
AppleTalk Port Name: ATALK_PS
Wireless Status
Mode: Ad-Hoc
ESSID:
Channel: -1
AP MAC Address: 00-00-00-00-00-00
Authentication: Open system
Encryption: Disable

is this normal that AP MAC Address don't have a MAC Address?
Cannot see my print server.
  0      
  0      
#1
Options
3 Reply
Re:Can't see my print server
2013-04-29 21:42:47
  0  
  0  
#2
Options
Re:Can't see my print server
2013-04-29 22:09:43
Yes and a WiFi scanner(inSSIDer) doesn't see the printserver.
  0  
  0  
#3
Options
Re:Can't see my print server
2013-08-13 14:15:29
Normally, after you setup the TP-link printer server, the printer server will not broadcast SSid any longer because it is connected to your own router.
  0  
  0  
#4
Options