QOS setup assistance on TD-W8961ND
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
QOS setup assistance on TD-W8961ND
Region : Argentina
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
Region : Canada
Model : TD-W8961ND
Hardware Version : V3
Firmware Version :
ISP :
Hi,
Can someone please tell me how to configure QOS on the TD-W8961ND so that the sip packets from a Linksys SPA2102 VOIP ATA which gets its IP address from the DHCP server in the TD-W8961ND is given priority over all other traffic regardless of whether such traffic comes from devices connected via ethernet or wireless to the TD-W8961ND. Please note: In my setup I cannot assign a static IP address to the VOIP ATA.
Thanks for your time,
Shaner
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
Region : Canada
Model : TD-W8961ND
Hardware Version : V3
Firmware Version :
ISP :
Hi,
Can someone please tell me how to configure QOS on the TD-W8961ND so that the sip packets from a Linksys SPA2102 VOIP ATA which gets its IP address from the DHCP server in the TD-W8961ND is given priority over all other traffic regardless of whether such traffic comes from devices connected via ethernet or wireless to the TD-W8961ND. Please note: In my setup I cannot assign a static IP address to the VOIP ATA.
Thanks for your time,
Shaner