Home Network Community > Access Points > Takes long time to connect to range extender
< Access Points

Takes long time to connect to range extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Takes long time to connect to range extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Takes long time to connect to range extender
Takes long time to connect to range extender
2013-03-12 16:24:47
Region : Turkey

Model : TL-WA830RE

Hardware Version : V1

Firmware Version : 3.12.17 Build 111108 Rel.31187n

ISP : TTNet

Region : Turkey

Model : TL-WA830RE

Hardware Version : V1

Firmware Version : 3.12.17 Build 111108 Rel.31187n

ISP : TTNet

i connect my wa830re to Airties (war-141) access point (not modem router) as on this page operation mode range extender. neither war-141 nor wa830re are dhcp server. my dhcp server is another 2 port fire walled wired adsl modem. after configuration RE everything is OK. but when i try to connect over RE it takes longer or cannot connect RE, but when i plug of RE and try to connect over AP, it connects immidiately, after configurations i just change the default gateway to AP ip and did not change other default values. my RE and AP are on the same ip segment as on the link.
  0      
 
  0      
 
#1
Options
6 Reply
Re:Takes long time to connect to range extender
2013-03-12 20:35:04
if possible connect RE to dhcp server
  0  
  0  
#2
Options
Re:Takes long time to connect to range extender
2013-03-12 20:42:27
You can set a solid wireless channel on your root AP.
And if necessary, upgrade the TL-WA830RE...
  0  
  0  
#3
Options
Re:Takes long time to connect to range extender
2013-03-12 22:21:19
Kane explain how to upgrade firmware TL-WA830RE Ver.1 & Ver.2 only have first firmware/factory firmware quaresma07 its only able to reload firmware
  0  
  0  
#4
Options
Re:Takes long time to connect to range extender
2013-03-12 22:29:36
my AP has a solid wireless channel same as on RE, both is 11,about firmware it can be tried, thnx
  0  
  0  
#5
Options
Re:Takes long time to connect to range extender
2013-03-12 22:35:19

danymarc wrote

Kane explain how to upgrade firmware TL-WA830RE Ver.1 & Ver.2 only have first firmware/factory firmware quaresma07 its only able to reload firmware


yes i think my firmware is the latest one "TL-WA830RE_v1_111108"
  0  
  0  
#6
Options
Re:Takes long time to connect to range extender
2013-03-12 23:40:54
quaresma07 it would be nice if you elaborated your threads by posting info. some of the devices have issues with security sometimes WEP others WPA you have not posted what security you are extending, how far are you from Airties (war-141), about connect to RE, what are you connecting, SmarPhone, Lap etc. as you can see this is not a guessing game, to get help post info.
about the channel, forget about it, when you use RE mode, this is not and issue for you now.
Start by factory default your RE with pin, http://www.tp-link.com/en/article/?faqid=426 then reload firmware and set it again, if you have same problems after this, enable DHCP to RE just remember you have to be in a dif subnet to avoid IP conflicts like 192.168. 2.0
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 2020

Replies: 6

Related Articles
 TD-W9980 Sync takes long time
571 0
 Reliance Netconnect dongle / TP-LINK 3420 - It takes a long time to connect
561 0
 WiFi long range extender
674 0
Long range connectivity
111 0
 Internet disappears every 10 - 30 minutes. Takes a long time to connect to internet.
792 0
 Deco M4 does not (or takes too long to) connect devices to the closest spot
737 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.