TP Link Router as Repeater - Internet not working issue after setting up bridging with 5ghz band
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I am on Airtel Broadband using Nokia ONT device G-2425G-A, channel 36. After enabling my TP link router (Archer C60 AC1350) as repeater, internet is not working on devices connected through the TP link router. It works fine if I enable bridging using 2.4Ghz band but doesn't work with 5Ghz band. Please help.
Steps for configuration -
1. Set router IP to 192.168.1.2
2. Advanced - Network - Lan - Set IP
Advanced - System Tools - System Parameters - Enable WDS bridging for 5ghz band
3. Advanced - Network - DHCP Server - UNCHECK enable DHCP server
Have you tried to set the WDS mode like this:
A good practice is to set the repeater IP address outside the main router DHCP pool range (e.g. 192.168.1.254) or make an Address Reservation if you want it to be in the DHCP pool range.
Have you tried to set the WDS mode like this:
A good practice is to set the repeater IP address outside the main router DHCP pool range (e.g. 192.168.1.254) or make an Address Reservation if you want it to be in the DHCP pool range.