Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Nardol It says so in the Greek TP-Link website. Though I just checked other TP-Link websites and it doesn't say it. Either not all websites have been updated properly, or there is a listing mistake in the Greek website, which I highly doubt.
- Copy Link
- Report Inappropriate Content
Many of us downloaded the 1.7.5 firmware from the website when it was avand now it's been removed? Could you kindly explain why? Do you recommend we stay or revert the firmware back to 1.7.4?
- Copy Link
- Report Inappropriate Content
Hi, further enhancements are needed for the Parental Control functionality on 1.7.5. This version has addressed certain security vulnerabilities and is indeed a more secure release.
If you haven't experienced any issues with Parental Control on the Deco M5, I think you could stay on 1.7.5 and wait for the next official release.
Nice to see you again. It would be more effective to send an email to the local technical support.
https://www.tp-link.com/gr/support/contact-technical-support/#Hotline-Support
The specific sales strategies differ across regions, and there is a possibility that they intend to substitute it with a higher model to cater to the growing local bandwidth requirements.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thanks for replying back. I think that type of information needs to be shared on the tplink website to avoid any confusion. I am not having any issues with 1.7.5 and i also dont user parental control so all good in that regard
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I upgraded my two M5's to 1.7.6 today. Update came automatically from Deco app. Everything went fine, thank you.
- Copy Link
- Report Inappropriate Content
Thank you and it is very helpful!
Best regards.
PS: During the initial release of version 1.7.6, some users might not be able to get the firmware notification via the Deco APP.
The firmware has been uploaded to the EU site if you want to manually update the firmware:
https://www.tp-link.com/en/support/download/deco-m5/#Firmware
- Copy Link
- Report Inappropriate Content
Got a notification from the app (new firmware available).
But the app (latest version) said the latest firmware was already installed (1.7.3).
Refreshing didn't help.
Manually (WebUI) installed the 1.7.6 on my 3 Deco M5 V1.0's and works fine so far.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link Also i have just noticed the time is out on my m5 now by 12 hours. not sure when this started. I am running 1.7.5
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 239107
Replies: 873
Voters 5
