Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Bolton-UK same with me. App only picks up 1.7.4. No sign of 1.7.5
also have a v3 and that currently says no update is available on it while the v1 do
- Copy Link
- Report Inappropriate Content
It's a odd one, I've had it where the deco app dosen't pick up the new firmware but I've always managed to manually update the firmware via the GUI but on this occasion I'm unable to, Must be some sort of glitch with the firmware, Hopefully tech support can shed some light on the issue we are facing.
- Copy Link
- Report Inappropriate Content
@budgie29 On TP-Link website there is no 1.7.5 at all for v3 so it is possible it is surprisingly only available for v1.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Bolton-UK no. And after a verification, it is the same for v1, I have not found any firmware version 1.7.5 for Deco M5, last is 1.7.4.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Bolton-UK I checked on US and French TP-Link website and it was not, so things become very strange :)
OK, In France I was mistaken, it is available.
Maybe it is specific for EU?
- Copy Link
- Report Inappropriate Content
@Bolton-UK maybe we should wait for communication from TP-Link, which does not look very probable in fact. I am really hesitating about trying to install it.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, The 1.7.5 is for the EU version only but actually, it is the same as 1.7.4 for other region codes.
(Deco M5(EU)_V1/V2/V3/V3.2 share the same firmware download link)
I checked the release note of the original 1.7.4 version for the EU version. It mentioned the 1.7.4 version number had been repeatedly requested before which might cause an upgrade failure in certain cases so that a new version number 1.7.5 has been submitted.
In this way, if you plan to manually update the firmware via web UI, it is suggested to use the latest 1.7.5 directly.
PS: I noticed the 1.7.5 hasn't been 100% rolled out and a part of the users will get the firmware notification first.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 242585
Replies: 862
Voters 5
