Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@budgie29 see my post from earlier this week; you can probably solve it by switching you Deco network to Router mode, reboot, then back to Access Point mode.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
BeerBee wrote
Hi All,
After upgrade my Deco M5 to 1.7.3 Build 20230906, I found that both download and upload throughput are becoming obviously lower.
Before upgrade, tested with SpeedTest or Fast.com it was 300Mbps, but after upgrade to 1.7.3 it becomes around 100Mbps....
I verified the CPE throughput with Ethernet connection, it's still 300Mbps, so I'm sure that it's Deco M5's problem.
I'm just wondering if anyone encounter the same issue with me?
Thanks.
Update, I found the lower throughput issue is caused by the total bandwidth of QoS default setting in 1.7.3 Build 20230906,
After tweaking it to 300Mbps, the download/upload throughput performance is back to normal.
- Copy Link
- Report Inappropriate Content
Please Support, enable the possibility to set the WI-FI channel.
I live in a residential complex and the decos are using the worst channels and conflicting with the different routers around me.
I noticed that when accessing the web version of the router, for a few seconds, options are available to define the channel, bandwidth and other options, which makes me believe that it can be done and/or enabled.
Thank you for your attention and I would be very grateful if this resource was released.
- Copy Link
- Report Inappropriate Content
@TP-Link it would really be very useful to have the ability to modify DTIM interval.
It could help for some connectivity issues with some ESPs and the Nuki smart lock 3pro, very recently I read again on the Nuki developers forum some people who have improved the situation with their smart lock when they set the dtim interval to 3. Even a Nuki founder confirmed this can really help to improve connectivity issue but nothing from TP-Link when asking. It is not a big feature which will increase memory consumption, it is something to write in config files when set by the Deco app...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@CenterInYou changelog only mentions security fixes, I hop TP-Link will communicate about this later when more people will have applied the fix...
Surprisingly, applying this update doe not reboot any Deco. It looks to be a hotfix.
- Copy Link
- Report Inappropriate Content
@Nardol Thanks! This Deco is at a remote location so I didn't want to pull the trigger on updating unless I had a little more info.
Nardol wrote
@CenterInYou changelog only mentions security fixes, I hop TP-Link will communicate about this later when more people will have applied the fix...
Surprisingly, applying this update doe not reboot any Deco. It looks to be a hotfix.
- Copy Link
- Report Inappropriate Content
@CenterInYou It did rebooted all of my 4 M5 units.
- Copy Link
- Report Inappropriate Content
@betelgeuse definitly a strange update which really deserve communication from TP-Link.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 237555
Replies: 873
Voters 5
