Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Balloni honestly I had no issues with 1.7.1 or .3. I've been very happy with my M5s.
- Copy Link
- Report Inappropriate Content
@TP-Link M5 1.7.3 is a nightmare for me so far. I wish I could roll back to 1.7.1... after updating, about half of the devices in my home lost wifi connection (including all Apple devices: 2 iPhones, 2 iPads, 2 Macbooks, and an Apple TV). If I try to reconnect (or even delete and re-add the wifi credentials) then I get connection for a few seconds before getting thrown off again. I had to disable Beamforming and Fast Roaming in order for things to work, but if I touch any of these settings then the whole thing comes crashing down again. No idea what was changed in 1.7.3, but I wish I had not upgraded... :-(
Is there any way to downgrade to 1.7.1?
- Copy Link
- Report Inappropriate Content
@TP-Link UPDATE ON PREVIOUS MESSAGE:
After a lot of troubleshooting I found the real issue. For years, I've had two of my Deco units hardwired to the ethernet, because of spotty reception at the far end of my building. This never caused any issues, until firmware 1.7.3 -- two hardwired Decos are no longer an option, as they start fighting with each other and cause the DHCP server of my cable modem to go haywire. Unplugging the cable from the (non-master) unit solved the problem.
- Copy Link
- Report Inappropriate Content
@cordswires if I understand correctly, you use your Deco in access point mode, not in router mode.
If Yes, have you tried to togle smart DHCP in More->Advanced?
If you use router mode, that's strange it has worked well before because in router mode, only the main deco should be wired to you ISP router.
- Copy Link
- Report Inappropriate Content
@Nardol yeah, I use the M5s in access point mode. What is the Smart DHCP setting? Is it new? I assume it should be disabled (as my cable modem is already handing out DHCP addresses) but even when disabling it, the problems persisted... and I don't assume *enabling* the option would be a good idea?
- Copy Link
- Report Inappropriate Content
@cordswires For more information about smart DHCP you can read it: https://community.tp-link.com/en/home/stories/detail/1804
If I remember correctly, smart DHCP is enabled by default, you can check in the Deco app, go to the last tab (named "more") then in advanced->smart DHCP
Smart DHCP has been implemented in M5 firmware version 1.6.0.
- Copy Link
- Report Inappropriate Content
Hi All,
After upgrade my Deco M5 to 1.7.3 Build 20230906, I found that both download and upload throughput are becoming obviously lower.
Before upgrade, tested with SpeedTest or Fast.com it was 300Mbps, but after upgrade to 1.7.3 it becomes around 100Mbps.... 
I verified the CPE throughput with Ethernet connection, it's still 300Mbps, so I'm sure that it's Deco M5's problem.
I'm just wondering if anyone encounter the same issue with me?
Thanks.
- Copy Link
- Report Inappropriate Content
@TP-Link two of my three M5 updated perfectly through the app, but one remains on 1.7.1. The app tried a few times to update the one M5 remaining, but the update failed every time. Now the app is simply ignoring the M5 stuck on 1.7.1.
I tried a manual update via the IP address, but the screen asks for a password which the document states in the email address used to set up the account, but this doesn't work, neither does the wifi password, so I am stuck.
How do I go about updating my last M5, or is this impossible now?
- Copy Link
- Report Inappropriate Content
Confirmed the lowered throughput issue is caused by firmware 1.7.3 Build 20230906
I just downgraded my Deco M5 with 1.7.1 Build 20230608, both download & upload throughput are back to normal as before.
- Copy Link
- Report Inappropriate Content
@TP-Link any chance to hide IoT network ssid?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 242681
Replies: 862
Voters 5
