Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, You could refer to the suggestions in this post:
https://community.tp-link.com/en/home/forum/topic/616452
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Is there any firmware in the pipeline to address these issues with 1.71? Surely your engineers are working on something. There are far too many people with issues right now. And all in the same vein.
- Copy Link
- Report Inappropriate Content
Just to keep you up to date. Ive dug out an old Archer C2 (V5) which is now the main router for the network. The ethernet connected devices now have a solid connection. The wifi on the Archer C2 is turned off (both bands, and the guest network turned off also).
I have carried out a full factory reset of all 5 M5 units and they are working in AP mode instead. The wifi still has regular dropouts though they manifest as slow or sometimes non working web access. It only seems to be certain things such as Youtube, images on twitter (X!?), certain web pages being slow/non responding etc...
For the moment it is OK but i look forward to a firmware update to correct these issues soon, I would prefer to be running the M5 network as the router since I can monitor and tweak settings via the app.
Any tests the firmware people want us to carry out im happy to do.
EDIT: FYI I have looked at the units and three of the units are V3.00 and the other two are V3.20 if that is of any relevance.
Cheers for now! :)
- Copy Link
- Report Inappropriate Content
@TP-Link Hello, if I want to downgrade from firmware 1.7.1 to 1.6.5 (Deco M5 AC1300), do you have a step-by-step tutorial?
After updating to the most recent version, calls in Teams hang or play only audio without any video, and Youtube videos only play for approximately 10 or 20 seconds before they stop and remain "loading".
Otherwise, do you have a new beta or an estimated date for a new release version?
- Copy Link
- Report Inappropriate Content
Hi, Welcome to the community.
There is indeed a new firmware for Deco M5:1.7.3 Build 20230906.
Release notes:
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
It is suggested to update to this version first to see whether it helps with the current issue.
Thank you very much and wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP I was looking forward for this new version.
When is it going to be available in Brazil? It still shows 1.7.1 update (I kept the 1.6.3 version after reading the feedbacks waiting for a better version).
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@CenterInYou @Balloni There is still the manual upgrade procedure if your local support website provide it but not the Deco app.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP I sincerely appreciate your speedy reply. I just updated the firmware to version 1.7.3, and I'll check to see if my issues have been resolved. I appreciate it a lot!!! :)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 237590
Replies: 873
Voters 5
