Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@budgie29 I upgraded today and first hours are OK for me.
Better is with previous versions I had a smart speaker which had some disconnection after updating Deco firmwares and with 1.6.1 I observed no disconnection at all.
And thank you for the information, because your post drived me to check for Deco update ;)
- Copy Link
- Report Inappropriate Content
Just upgraded from 1.6.0 to 1.6.1 and Monthly Reports is closing immediately after launch and logs out of Deco app on iOS,
Anyone else experiencing this behavior?
@TP-Link
- Copy Link
- Report Inappropriate Content
I have M5 V3.0.9 Firmware V1.5.7 and seems to me that V1.6.0 was not very stable reading feedbacks here. Since my network is fine, I'm afraid to upgrade to V1.6.0 and have problems. However, V1.6.1 still doesn't appear for me in the app. Do I have to upgrade to V1.6.0 so that V1.6.1 be able to download or can I wait to be available for me in the app and upgrade directly from V1.5.7 to V1.6.1?
- Copy Link
- Report Inappropriate Content
Hi, you could update 1.5.7 to 1.6.1 directly via web UI.
@Chrisgibson Since no one followed yet and I did not see similar feedback elsewhere, I think it might only be triggered under certain circumstances.
Could you please help me get the App log via Deco APP>settings on the top left>help>contact us>suggestions and Add the APP log?
Thank you very much.
best regards.
- Copy Link
- Report Inappropriate Content
I upgrade via the Web UI and that all worked fine and all devices seem to be connected correctly.
But when I check the new app, to confirm the firmware, I get an error.
You can see on the Web UI that all my M5's are on 1.6.1 now.
Any advice what's going on?
Thanks.
- Copy Link
- Report Inappropriate Content
Monthly Reports running after restarting device. Thought I tried that before contacting you. Seems to work just fine.
Thanks for your prompt response.
- Copy Link
- Report Inappropriate Content
@TP-Link Is this work for Deco M5 v2.1 US?
- Copy Link
- Report Inappropriate Content
Hi, Yes and It is suitable for US V2.1 as well.
@TonyReilly I see you are on Deco 3.0.8 beta APP and I think it is because this App is still on beta release and hasn't been uploaded to the cloud base.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
I think i found some bug in 1.6.1, after upgrading it to 1.6.1 last week, yestwrday my wife complain that her Redmi Note 9 Pro was connected to Deco but no internet, others device seems fine. Eestart her phone and still the same, i solve it by setting randomize MAC address on her Wifi setting. This morning, mine Mi Note 10 acting the same, again, setting randomize MAC solve the issue.
I think i still can solve it by restarting my all decos, but i want to check before restarting it.
Regards,
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback.
Have you noticed the same issue on other mobile devices as well, apart from Redmi Note9 and Mi Note10?
If later the same issue started again, could you please help me check whether you are able to get valid IP addresses on these devices, and would they show up online on the Deco APP?
And have you added any MAC addresses in the Deny list on the APP?
It is also suggested to check whether you have configured some parental control rules, especially Bedtime settings on these two devices.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238903
Replies: 873