Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @TonyReilly,
if you not already tried this built, please try it
https://static.tp-link.com/upload/beta/2022/202208/20220816/Deco_M5_1.6.0_220816_solve_some_bugs.zip
Regards,
TonyReilly wrote
@TP-Link Hi All,
I hope you can help. I've 4 X M5 units (3 V1's and 1 v3) . They've been working flawlessly for a good while, but since the last firmware update I'm having serious issues with DHCP addresses being issued.
It happens most days when I get up and open my work laptop. It either won't connect at all, or will give an error that it couldn't be assigned a DHCP / IP Address. It happens on my Pixelbook and on my wifes new Macbook Pro. I've also got a few smart devices that won't connect. I had to reboot the whole network again today to get connected (devices that already online are fine, but it's ones looking for new IP addresses that are having issues).
Can you please advise if this is a known issue and if there's a fix for it.
There's loads of IP addresses left to be used so it's not that they've run out or anything.
Thanks.
- Copy Link
- Report Inappropriate Content
Hi Tony,
Feel you pain as I was in exactly the same place. Tried doing daily reboots and still no change.
I did change to the new beta firmware about a week ago and things have been more stable. You shoulf give that a try.
There was a link earlier but putting it here. In the zip file there is a simple PDF to follow.
- Copy Link
- Report Inappropriate Content
Hi, Have you tried to separately log into the web UI of each M5 with 0525 to upload the 0816 beta individually?
The IP address of each M5 could be found on the Deco APP directly.
It is also suggested to connect to the WiFi or Ethernet of this Deco directly when performing a firmware upgrade.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Anyone having the an issue with the internet speed after upgrading to the official version? For both official version my internet speed is slowing down significantly. My internet speed is 300mbps. I am getting this speed when I am connected to the main deco. But when I connect to the other ones I am only getting round 20 to 30 mpbs.
Can anyone help me with this please
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link Is there any time frame for Brazil? 1.6.1 is not available for me yet.
By the way, whats the changelog for this new version?
Thank you
- Copy Link
- Report Inappropriate Content
@TP-Link Same Question - Any update on when we can expect the update to be rolloed out? I've tried the app and the web interface for new updates and it says 1.6.0 is still the most up to date one.
- Copy Link
- Report Inappropriate Content
I live in Brazil and I was able to update to 1.6.1 version but only after installing the new DECO Android app. In this forum look for "Deco APP 3.0" topic and you will have to download the apk aside from Playstore and install it manually.
- Copy Link
- Report Inappropriate Content
Thanks.. just tried that, but no update still.
- Copy Link
- Report Inappropriate Content
You can download it manually then access your main deco web interface (its ip address on any web browser), login with your deco account information and update manually the firmware under Advanced-> System -> Firmware upgrade
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 236528
Replies: 873