Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Updated firmware of my M5 to version 1.60 an hour ago and now it's just a red light for me. Even created a new network but still the same. Nothing works now. Would really need help on this as my work is affected.
- Copy Link
- Report Inappropriate Content
Any news on when a firmware for the P7 will be released including these features?
When I look at my P7's in the app, Signal Source now says 'Unavailable for current firmware'.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Raijos Thanks for the feedback.
Have you tried JanRekenaar' suggestions already? Since when I checked your TP-Link ID, I see Deco M5 is online already and I guess you have fixed this issue on your own?
Best regards.
Dave_BugOne Welcome to the community.
Since Deco P7 has been end of life for quite a while, I haven't got any news about whether it is planned to add the same features on it.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP I have a mesh network using M9+ as main and satellite and an M5 as a satellite.
System wants to update M5 to 1.6.0. Shouldn't I wait for M9+ to get 1.6.0 and upgrade all 3 together so they all interoperate together?
It's odd to see posts regarding 1.6.0 for what looks like a few years and nothing about 1.6.0, as far as I can see for any other models.
I wish these mesh networks would have a solution for Apple Devices using different MAC addresses for privacy. The way I think it should work is new MACs get placed into a default profile that I can set the restrictions on, think of as Jail, where you can't do much other than configure the device. You can then move the device to another profile with more access than Jail, if you choose. Apple Users should set the feature on your mesh SSID network to not change MAC addresses for privacy. If they don't do this, their new private MAC will just go to Jail and they'll be annoyed. So they'll have a reason for turning MAC privacy off on your network or they'll just get the very restricted Jail access. Right now the MAC privacy breaks the kids out of their profile into untracked and unmetered access.
While I'm suggesting things:
You should have an option to sort devices by how much bandwidth they are currently using.
You should also have a feature where I can set a profile to monitor access to categories I can only block in profiles. I want the option to monitor without tipping off that I'm watching. Blocking makes them go somewhere else. I want to know what they are accessing and how often. There's no way to do that with the current system. The UI would just be a choice to block or monitor that category.
- Copy Link
- Report Inappropriate Content
@SwingBoy seeing as this update to the M5s has pretty much nerfed my P7's - I'd say yes. Avoid updating.
- Copy Link
- Report Inappropriate Content
SwingBoy wrote
@David-TP I have a mesh network using M9+ as main and satellite and an M5 as a satellite.
System wants to update M5 to 1.6.0. Shouldn't I wait for M9+ to get 1.6.0 and upgrade all 3 together so they all interoperate together?
My mesh network is two M9+ and two M5. M5s are satellites. I upgraded my M5s to 1.6.0 when I got notification in Deco app. I have not noticed any difference in how my home network and WiFi devices behave before and after M5 firmware upgrade.
With your and mine Deco mesh configuration, the only obvious benefit of new firmware is ability to select Signal Source in M5. If your Satellite Deco M5 already connects the way you want it to, or if it is wired, this firmware upgrade won't bring any obvious benefits.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
TPLINK, Please have the firmware update (similar to M5) for M9+ available on DECO App. Why is it taking so long?
- Copy Link
- Report Inappropriate Content
Any news for firmware upgrade 1.6 of M5 coming to M9+ users. It seems only M5 users are given priority for over a year now. We M9+ users have not been able control which mesh & device connects to what.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238094
Replies: 873
Voters 5
