Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@knorde I updated each deco separately 😉
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Deco M5 firmware 1.6 is now available through Update Deco feature in Deco app for Canada, possibly US and other regions. I haven't got notification about new firmware in the app, but under Update Deco there it was.
Check in your Deco app, and if you don't see it yet, keep checking on regular basis.
I've updated my two Deco M5 with new firmware through Deco app. Update was successful, but it took longer than app expected. Just give extra few minutes for update to complete, after Deco app says it is done.
- Copy Link
- Report Inappropriate Content
@Bolton-UK
How this is possible that i updated 1 but all the 3 are updated?
- Copy Link
- Report Inappropriate Content
It is not available on Brazil. iOS app.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
"anyone else holding off for the moment?"
Keep in mind this forum is for the 1.6.0 betas so I don't many of us are "holding off"
- Copy Link
- Report Inappropriate Content
@CenterInYou not anymore since the firmware is now GA
- Copy Link
- Report Inappropriate Content
Hi, you could go to Deco APP>More>Update Deco to see whether it could detect the official version.
If not, please refer to the link here to install the firmware: Deco M5-1.6.0 20220525
knorde Hi, you might have updated the main Deco first so later the satellite Deco could sync the same firmware from the main Deco.
But it is not always successful and most of the time, it needs to be updated one by one via the web interface.
I see you have updated to 1.6.0 already, is everything alright?
Thank you very much.
Best regards.
--------------------------
Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.
- Copy Link
- Report Inappropriate Content
Since the update, I've been having trouble with 1 ip camera losing its connection at night. This is what I get back in the log:
Tue Jun 28 02:50:14 2022 daemon-info hostapd: ath0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated due to inactivity
Tue Jun 28 02:50:15 2022 daemon-info hostapd: ath0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Jun 29 02:08:49 2022 daemon-info hostapd: ath0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated due to inactivity
Wed Jun 29 02:08:50 2022 daemon-info hostapd: ath0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
(address changed to XX).
(i have a - instead of a . done between daemon and info because the forum tells me not to post a link)
Do you have any idea how that is possible and how I can solve it?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 242661
Replies: 862
Voters 5
