Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, It will be a newer version that includes fixes based on feedback on 1.6.0 beta.
As for the release date, actually, I see the official firmware 1.6.0 is ready but the internal software review process has not been finished yet.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP so the last time TP-Link responded to beta test findings, not that long ago, there where lot's of major bugs unresolved. Will this release big a big-bang-release? If I install this 1.6.0 when it is there, are there options to roll back to 1.5.7?
- Copy Link
- Report Inappropriate Content
David, Will this include M9 plus users? - Ron
- Copy Link
- Report Inappropriate Content
@Wizman Hi, Deco M9 plus is not included yet.
JanRekenaar It can not be downgraded back to 1.5.7 either, like beta 1.6.0.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP and when is the firmware out? You said it will be out by the end of this week
- Copy Link
- Report Inappropriate Content
Thank you for your reply. Frustrating to hear that M9 plus users are not covered by the update. I find the wifi connection slow for the M9 plus 3 meshes. A very inefficient costly product.
- Copy Link
- Report Inappropriate Content
@David-TP when is this planned for the M9 Plus? Crazy to think a more expensive device won't get the update that will allow it to properly use the extra hardware! I have 3 units and my third takes signal from the main rather than the secondary unit which has better signal as it's closer to the main unit. Extremely frustrating.
- Copy Link
- Report Inappropriate Content
@David-TP still waiting David. What's going on?? Please provide us an update asap
- Copy Link
- Report Inappropriate Content
@TP-Link the longest beta I've seen, near a year.
Deco products have definitly the lowest priority for TP-Link, sadely.
- Copy Link
- Report Inappropriate Content
Hi, It has been released just now and you might also get the firmware notification via Deco APP.
https://www.tp-link.com/support/download/deco-m5/#Firmware
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238967
Replies: 873
Voters 5
