Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Billmanakos Is there an option to revert back to 1.5.x from 1.6 version ?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link I have an issue, I have upgraded the firmware to 1.6.0; however, my app does not provide me with the option to chose which device connects to which Deco. It is running the latest version of the app. Any suggestions?
- Copy Link
- Report Inappropriate Content
@posta Do you have only M5 in your Deco network?
And do all have 1.6.0 firmware?
- Copy Link
- Report Inappropriate Content
Bobrovsky wrote
Hello
I installed firmware 1.6.0. So far so good, the sattelite source selection and device/client source connection are great additions we were waiting for since years! Good job!
However these features are still buggy.
1) the device/client source conection doesnt work for devices connected on the guest network, as stated. But why? Many of us connect all IoT device to the Guest network for security reasons, it would be great of we could assign them which Deco they can be connected to as for the rest on the main network.
2) as mentionned by many users on this thread, the feature is still useless as for today. For example I assign my phone to only connect on the 5ghz, but it still connects randomly on rhe 2.4ghz
Btw item #2 seems to be Ok now,
I did not update the firnware or change any setting, seems that a few reboots since a couple of weeks has fixed it
- Copy Link
- Report Inappropriate Content
@Nardol Thank you for the question. I just checked and one of the Deco's was running on a different firmware. Unsure why. I have upgraded it and now everything seems to be working well.
- Copy Link
- Report Inappropriate Content
This last beta firmware is very buggy for me.
I already had to reboot the deco more then 5 times since i install the new firmware.
The last one was because some devices were not connecting to the Wireless network.
When is it schedule to be released the new beta? Or the final version?
Kind regards,
- Copy Link
- Report Inappropriate Content
@skribble welcome to the community.
Would your current issue start just after updating to the 1.6.0 beta? or the same issue already existed on 1.5.7 and 1.6.0 firmware did not make any improvement.
If it is the latter, I wish you could start a new thread here with the following details:
1. Here you mentioned that "The last one was because some devices were not connecting to the Wireless network", I think what you said might be the devices could connect to Deco M5 and would be randomly disconnected from the internet?
2. May I know the model numbers of these devices?
Thank you very much.
Best regards.
--------------------------
Deco X50-PoE is ready for your advice. Please spare a moment and help us complete the following survey.
- Copy Link
- Report Inappropriate Content
@TP-Link Hello, when will a final version of 1.6 be released?
- Copy Link
- Report Inappropriate Content
Amazing how this product was abandoned.
EEro use exacly same hardware (Qualcomm IPQ4019) and have a lot of features and amazing software to control network.
Any update coming or best solution for deco is change tplink to another router?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 243749
Replies: 862
Voters 5
