Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link Thanks! a fix has been provided to me, I am testing and see if I confirm the fix.
Even if I still think TP-Link should have provided more than one beta to test for all users, I can notice there are fixes for issues and good support. Maybe developers should better take in account feedbacks from user and from support team. Everybody would loose less time if we did not have to send a sugestion or a bug twice :)
- Copy Link
- Report Inappropriate Content
@TP-Link I'm also having the same issues about the antivirus, the monthly report and, most infuriating, the weird symbols for devices name. I already sent the system logs but, could I get the updated beta firmware too?
Thanks
- Copy Link
- Report Inappropriate Content
Hi, the antivirus and monthly report issues will be fixed on the official firmware.
As for the weird symbols, can I have a picture of them?
Could you please refer to this link to manually change the device name:
- Copy Link
- Report Inappropriate Content
@David-TP When is the official firmware going to be released?
Here's the picture, sometimes I also get `rp as devices name
- Copy Link
- Report Inappropriate Content
@TP-Link I confirm the fix for antivirus. Same for the monthly report.
Even if there is still a strange point: I have a warning to tel me I have not changed my wi-fi password for more than a year when I started my Deco network on last summer so less than a year ago ;)
- Copy Link
- Report Inappropriate Content
@eduardoRoth I get that too.. Any news on an updated version yet TP LInk? Its awfully quiet over there..
- Copy Link
- Report Inappropriate Content
@Kingdaveontour1 because simple is not TP-Link, try by contacting support using the app. And check the option to send system logs.
They answer very quickly.
They should provide you a fix.
- Copy Link
- Report Inappropriate Content
Update:
The second edition of 1.6.0 firmware(Deco M5 1.6.0 build 20220214) has been updated no the original post and It has improved all the reported issues on the first beta version.
Any feedback would be highly appreciated.
PS: if you want to know the release roadmap of firmware 1.6.0 on other models or the ETA of official 1.6.0 on Deco M5, please comment on this link.
When will 1.6.0 be released for the Deco
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
@TP-Link about bandwidth limit to guest network, what values should we specify? Is it percentage, KB/S Kb/s, MB/s, Mb/s or something else?
Maybe it is an accessibility issue even if I asked someone to read the interface but I don't read any unit or explanation of how to specify the limit so I don't really understand how it works.
If possible to explain it only with words no screenshots please :)
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 237850
Replies: 873
Voters 5
