Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link Please, I beg you.. can you provide us with a way to get off this beta. We had no idea that this beta version would be over 6 months long and have zero update revisions. Seasoned beta testers would have expected many updated revisions by now or maybe even an official version way within half a year!
Or please stop ignoring us and provide an update on when you estimate a new version will be available.
Yours hopefully
1.6.0 Users
- Copy Link
- Report Inappropriate Content
Be thankful because owners of other models (like me) have been waiting for a beta for over two years and there is still no solution to the problem.
@TP-Link are just with ZERO support and updates
- Copy Link
- Report Inappropriate Content
your totally right. its a big problem tplink ignore us, and let users down. its time to throw away the piece of junk and buy real stuff
- Copy Link
- Report Inappropriate Content
@TP-Link would you provide an updated version before releasing it as stable?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I am very disappointed with TP-Link.
I'm planning to migrate to unifi solutions.
TP-LINK NEVER MORE.- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link it might be more than reasonable to have an answer please.
For now I am waiting for my Deco to stop working and switch to Asus solution which look good. Unify is so expensive and overkill for a domestic network.
- Copy Link
- Report Inappropriate Content
@TP-Link I've installed this Beta on my M5, and now some of my devices don't have proper names in the clients list. I am in the UK, but for some reason, some devices show up with this ������سخي��� . I have no idea what this is, but from checking the MAC address it just seems to be a phone on the nework. Another of my devices also has had its name changed to "rp , which again, I don't know what that is. Before the update I had none of these issues.
- Copy Link
- Report Inappropriate Content
Mine has been the same since 1.6.0
Unfortunately like the rest of us you are stuck now with no fixes in sight
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238081
Replies: 873
Voters 5
