Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
This beta program is pure bs... a big waste of time for the customer. I'm officially retiring my Deco M5 units. Lookin for a better mesh alternative.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, I see similar feedback on a different model, and could you please send us the APP feedback via Deco APP>Overview>three lines on the top>help>contact us>suggestions and add the APP log?
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link any plans to release this update for the S4?
- Copy Link
- Report Inappropriate Content
Just updated my 4 clients to Beta 1.6.0 but the one connected wired via my TP Link switch is nog only connecting wireless to the main Deco.
whatever I tried, it won't see the wired connection.
- Copy Link
- Report Inappropriate Content
@Matthijs88 please please dont update to 1.6.0
It is rubbish, dont work with device steering so you be stuck unable to downgrade.
I have had so many issues but unable to downgrade to a stable FW
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for getting back to me.
I have forwarded your case to the engineers before # TKID210826738 but you have not given us feedback yet.
I am afraid it’s unfair to conclude the firmware is rubbish without anything being done.
If you are still troubled by the current issue, we will be appreciated if you could give us an update.
Thank you for your understanding.
- Copy Link
- Report Inappropriate Content
@nleaney nobboo alexfmachado and astephen Hi, we will not discuss the release plan on this thread.
Please subscribe to the following post and we will post here if any news were updated:
When will 1.6.0 be released for the Deco M9 Plus
@Matthijs88 Could you please send an email to support.forum@tp-link.com with the following information:
1. A picture of the detailed network topology, such as how the Decos are linked together?
2. the model number of your TP-Link switch.
3. Will it be the same if putting another satellite unit to this spot and will it be able to create the Ethernet backhaul?
Thank you very much and wait for your reply.
- Copy Link
- Report Inappropriate Content
@TP-Link Some feature are helpfully, when you can release as a official firmware.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238985
Replies: 873
Voters 5
