Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link
I still have no updates available.....
- Copy Link
- Report Inappropriate Content
@Boriy not necessaraly a bad thing.. given the fact that the release causes bad connections and other problems, so it seems.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@budgie29 thanx for sharing. What is your situation? More decos or one? Are the Decos Ethernet connected backhaule (and if so, does it still work)) or wireless connected? Do you use camera's connected to deco? I ask this because these things seem to give problems / instability with other users.
- Copy Link
- Report Inappropriate Content
im using it since it was launch 1.6.0.
two units connected by Ethernet Backhauled, all working great, no problems.
much better then the last beta, I was getting problems with the range of Wi-Fi network and now all ok!
- Copy Link
- Report Inappropriate Content
I upgraded my two M5's to 1.6.0. Tuesday. I got update through Deco app then, I'm in Finland.
Decos have been working perfectly before and after the upgrade. I'm still amazed how well these have performed, bought them at 2018.
- Copy Link
- Report Inappropriate Content
@JanRekenaar router mode then second in wireless mode. I dont have any cameras with my setup
- Copy Link
- Report Inappropriate Content
@budgie29 thnx for the update.
- Copy Link
- Report Inappropriate Content
Same problem with 2 camera's now. I never get this error before the update.
Now my 2 camera's go offline and don't come back online.
I need to reset the power adapter on both.
This is what I get back in the log:
Tue Jun 28 02:50:14 2022 daemon-info hostapd: ath0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated due to inactivity
Tue Jun 28 02:50:15 2022 daemon-info hostapd: ath0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Wed Jun 29 02:08:49 2022 daemon-info hostapd: ath0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated due to inactivity
Wed Jun 29 02:08:50 2022 daemon-info hostapd: ath0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
(address changed to XX).
(i have a - instead of a . done between daemon and info because the forum tells me not to post a link)
Do you have any idea how that is possible and how I can solve it?
- Copy Link
- Report Inappropriate Content
@TP-Link When is it going to be available in Brazil?
Thank you!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238847
Replies: 873
Voters 5
