Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link Agree. We were properly sold down the river on this Beta program. Nobody should be stuck on Beta software for nearly a year! No progress reports, release notes on fixes...nothing
Currently looking at other mesh brands as replacement..
- Copy Link
- Report Inappropriate Content
@TP-Link i have never seen a beta like this...no information...too long...nothing...i thought changed but no money for it right now, it would be expensive to replace 5 device... The application is sloppy, no possibility of mass actions... I have 55 devices connected in total and making changes becomes a real torture... just deleting devices that no longer exist is torture. .. I don't know how other brands work but I'm disappointed that I bought tplink.
1 year for a beta...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
when will a final version of 1.6 be released?
9 months now since the beta started!! Seriously what is going on as this is getting ridiculous.
I started to migrate all my deco devices for Unifi solutions...
- Copy Link
- Report Inappropriate Content
@TP-Link
Year 2023
TP-LINK: We glad to announce update 1.6 is available for everybody.
- Copy Link
- Report Inappropriate Content
Come on TP-Link at least have the decency to give us a update!
Why aren't you keeping us updated on the beta?
We have helped you testing out the beta and providing our findings/bugs etc.
- Copy Link
- Report Inappropriate Content
Any progress on the update for M9 users?
These are needed urgently since long been pending:
Ability to select which deco to use as source signal for both device and mesh unit.
Scheduled restart
Is anyone looking into these.since these are long overdue already.
- Copy Link
- Report Inappropriate Content
@TP-Link Just pressed update deco for the last time tonight. 2x ASUS ZenWiFi Pro XT12's coming tomorrow. Can't wait to forget about this useless, forgotten about beta program that has severely reduced my user experience and sanity. Some poor sap is going to end up with 5 mesh devices that will never be properly supported. Good luck to the rest of you..
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 239029
Replies: 873
Voters 5
